{"title":"Ford Mustang S650 GT Upgrades","description":"","products":[{"product_id":"eibach-s550-mustang-front-camber-adjust-bolts","title":"Eibach S550 Mustang Front Camber Adjust Bolts","description":"\u003cp\u003eMustangs with aftermarket parts that alter the front suspension geometry sometimes need more camber adjustment than can be done with typical caster camber plates or the OEM setup. \u003cbr\u003e\u003cbr\u003eWhile Steeda Front Camber Mounts look good and give great adjustability, for a small camber tweak for a great price these bolts will do the job!\u003cbr\u003e\u003cbr\u003eThese Camber Bolts increase camber-range up to \u003cspan\u003e+\/- 1.75 degrees\u003c\/span\u003e by allowing you to adjust the angle that the front spindle attaches to the strut. \u003cbr\u003e\u003cbr\u003eSold in pairs - 1 pair adjusts both front struts.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor a more heavy duty option with a  lot more adjustability and negative camber potential, look at the \u003ca href=\"https:\/\/steeda.co.uk\/products\/steeda-s550-mustang-camber-plates\" title=\"Steeda Camber Plates\"\u003eSteeda Camber Plates (555-8139)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNOTE These also fit Mondeo mk5\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":30301738041416,"sku":"5.81280K","price":28.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/products\/271-81280_Steeda_Front_Camber_Bolts.jpg?v=1772118569"},{"product_id":"ford-performance-mustang-knuckle-to-toe-link-bearing-assembly","title":"Ford Performance Mustang Knuckle to Toe Link Bearing Assembly 2015-2024+","description":"\u003cp\u003eThis Mustang Knuckle to Toe Link Bearing Assembly might be just the suspension enhancement you need for this upcoming season.\u003cbr\u003e\u003cbr\u003eIntegral component of the M-FR3A-M8 Track Handling Pack\u003cbr\u003eReplaces the rubber Toe Link Bushing in the rear knuckle with a Delrin Lined Spherical Bearing\u003cbr\u003e\u003cbr\u003ePerfect compliment to our \u003ca title=\"Steeda S550 Mustang Ultimate IRS Handling Stop The Hop Pack\" href=\"https:\/\/steeda.eu.com\/products\/steeda-s550-mustang-ultimate-irs-stop-the-hop-pack\" target=\"_blank\"\u003eSteeda \"Stop the Hop\" pack\u003c\/a\u003e or when fitting our \u003ca title=\"Steeda S550 Mustang Rear Adjustable Toe Links\" href=\"https:\/\/steeda.eu.com\/products\/steeda-s550-mustang-adjustable-rear-toe-links\" target=\"_blank\"\u003eRear Adjustable Toe Links...\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eRemoves suspension compliance with minimal impact to ride quality\u003cbr\u003eImproves handling, especially in power down situations\u003cbr\u003eKit includes 2 bearings\u003cbr\u003e\u003cbr\u003eNormally in stock\u003cbr\u003e\u003cbr\u003eManufacturer Part Number: M-5A460-M\u003cbr\u003e\u003cbr\u003eS550: 2015-2023: Fits Mustang GT \u0026amp; Bullitt and 2.3L EcoBoost\u003cbr\u003eNOTE: This part is standard fitment on Mach 1 model.\u003cbr\u003e\u003cbr\u003eS650: 2024+ : All Models\u003c\/p\u003e","brand":"Ford Racing","offers":[{"title":"Default Title","offer_id":30301740630088,"sku":"M5A460M","price":115.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/products\/M-5A460-M_Toe_link_Knuckle.jpg?v=1572079683"},{"product_id":"s550-mustang-wheel-nuts-lock-set-black","title":"S550 \/ S650  Mustang Wheel Nuts Lock Set- Black","description":"\u003cp\u003eGorilla wheel nuts for aftermarket wheels. Available in black. Set includes 20 Wheel nuts and key.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"gs_cit_stry_pre gs_cit_stry_sm\"\u003e\n\u003cli\u003eDurable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eActs as lock nuts as special key required.\u003c\/li\u003e\n\u003cli\u003eFits aftermarket wheels which require slimmer nuts (where OEM wheel nuts are too big)\u003c\/li\u003e\n\u003cli class=\"gs_tkn\"\u003e\n\u003cdiv class=\"gs_p\"\u003e\n\u003cstrong\u003e\u003cspan class=\"gs_tkn\"\u003eThread\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"gs_tkn\"\u003eSize\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"gs_tkn\"\u003e:\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"gs_tkn\"\u003eM14\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"gs_tkn\"\u003ex\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"gs_tkn\"\u003e1.5\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"gs_tkn\"\u003e\n\u003cdiv class=\"gs_p\"\u003e\n\u003cstrong\u003e\u003cspan class=\"gs_tkn\"\u003eOverall\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"gs_tkn\"\u003eLength\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"gs_tkn\"\u003e:\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"gs_tkn\"\u003e35.56\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"gs_tkn\"\u003emm\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"gs_tkn\"\u003e\n\u003cdiv class=\"gs_p\"\u003e\n\u003cstrong\u003e\u003cspan class=\"gs_tkn\"\u003eKey\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"gs_tkn\"\u003eHex\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"gs_tkn\"\u003eSize\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"gs_tkn\"\u003e:\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"gs_tkn\"\u003e13\/16\"  (20.6mm)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli class=\"gs_tkn\"\u003e\n\u003cdiv class=\"gs_p\"\u003e\n\u003cstrong\u003e\u003cspan class=\"gs_tkn\"\u003eSeat\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"gs_tkn\"\u003eAngle\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"gs_tkn\"\u003e:\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"gs_tkn\"\u003e60\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"gs_tkn\"\u003edegrees\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eFor S550 OEM wheels larger wheels nuts are recommended like the Gorilla \u003cspan\u003e96643BDX, available by special order.\u003c\/span\u003e \u003cbr\u003e\u003cbr\u003eNOTE: Gorilla discontinued the chrome version in 2026.\u003c\/p\u003e\n\u003cp\u003eFitment: \u003cbr\u003eMustang S550 : All - 2015-2023\u003cbr\u003eMustang S650 : All - 2024+\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301832740936,"sku":"182-71643-NBC","price":99.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/products\/Gorilla-S550-Mustang-Wheel-nuts-black-zoom_22326887-1f66-452e-b279-83d619eae497.jpg?v=1572079736"},{"product_id":"steeda-adjustable-heavy-duty-s550-engine-mounts-gt","title":"Steeda Adjustable Heavy Duty Engine Mounts (GT) 2015-2024+","description":"\u003cp\u003eIn addition to being much more durable than the factory engine mounts, these Steeda Adjustable Motor Mounts for 2015-2023 S550 \u0026amp; 2024+ S650 Mustang GT are adjustable from factory height up to 3\/4 of an inch lower to create clearance for superchargers and strut tower braces. \u003cbr\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eSteeda Adjustable Motor Mounts for S650 or S550 Mustang GT also feature dual durometer bushing packages. Supplied are 4 softer red bushes and 2 harder black bushes. Choose the softer red bushings for great control with only minimal increase in engine vibration transmission on a normally aspirated street car. For any supercharged car, or any car going to the track or the drag strip, you should use a combination of the hard black bushings and softer red bushing as per the install guide. This combo will offer maximum control, but will increase engine vibration transmission.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAllows for a 3\/4\" (19mm) adjustment range\u003c\/li\u003e\n\u003cli\u003eAdjustable in 1\/4\" (6.3mm) increments\u003c\/li\u003e\n\u003cli\u003eHigh quality billet construction\u003c\/li\u003e\n\u003cli\u003ePerfect for Whipple (or any other) Supercharger Install\u003c\/li\u003e\n\u003cli\u003eMade in the USA by Steeda\u003c\/li\u003e\n\u003cli\u003eNormally in stock in UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFitment: \u003cbr\u003eS550 V8 2015+ inc facelift models \u0026amp; GT350\u003cbr\u003eS650 V8 2024+ inc GT \u0026amp; Dark Horse\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/Steeda_Adjustable_Heavy_Duty_S550_Engine_Mounts__2015_GT__555-4039_Installation_Instructions.pdf?v=1538900702\" title=\"Steeda Heavy Duty Engine Mount Install Guide for S550 Mustang\" target=\"_blank\"\u003eINSTALL GUIDE - CLICK HERE\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTEEDA INSTALL TIP\u003c\/strong\u003e: Install CAREFULLY to maintain alignment of the bushes on install and RE-USE the factory heat shields! \u003cstrong\u003eRead INSTALL GUIDE!\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003eWe recommend these for race car useage \/ Supercharger usage and they WILL require extra careful installation and in severe duty use extra reinforcements \/ protection to keep the bushes intact and performing, for example a metal band clamp round the outside.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301857120328,"sku":"555-4039","price":240.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/555-4005-S550-GT-EngineMounts2-zoom_0b52edbf-2d81-45e3-a3af-3334be7a4012.jpg?v=1774696944"},{"product_id":"steeda-s550-aluminium-driveshaft-for-mt82-transmissions-2015-17","title":"Steeda Aluminium GT 3.5\" 1350 Driveshaft for Manual and Auto Transmissions 2015-2024+","description":"\u003cp\u003e* 19lbs (8.6kg!) lighter than OEM driveshaft *\u003cbr\u003e\u003cbr\u003eLooking to reduce overall weight and rotating mass? Steeda now offers our Steeda Mustang 3.5\" Aluminium Driveshaft for all S550 and S650 2015-2024+ Mustang GT's. Our driveshafts deliver improved driving performance and provide quicker acceleration. Take your car to the track often? Install a Steeda aluminium driveshaft for lower ET's.\u003cbr\u003e\u003cbr\u003eOur Steeda Mustang 3.5\" Aluminium Driveshaft bolts directly to your 2015-2017 or 2018+ Mustang GT's OE flange and requires no adapter, and the one-piece engineering eliminates the need for a center bearing.\u003cbr\u003e\u003cbr\u003eWe have tested our Steeda Mustang 3.5\" Aluminium Driveshaft with various modification and gearing combinations and experienced no increase in NVH.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8.6KG (19 lbs) lighter than OEM driveshaft\u003c\/li\u003e\n\u003cli\u003eLightweight aluminium one-piece driveshaft\u003c\/li\u003e\n\u003cli\u003eRated for up to 800 hp\u003c\/li\u003e\n\u003cli\u003eImproved driving performance\u003c\/li\u003e\n\u003cli\u003eQuicker acceleration, lower ET's\u003c\/li\u003e\n\u003cli\u003eDirect bolt-in, easy installation\u003c\/li\u003e\n\u003cli\u003eAvailable for Manual and Automatic Transmissions\u003c\/li\u003e\n\u003cli\u003eNo increase in NVH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart: SELECT FROM DROPDOWN\u003cbr\u003e238-10045511S Manual Transmission 2015-17\u003cbr\u003e238 10045510S Auto Transmission 2015-17\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003e238-10202303S Auto Transmission 2018+\u003cbr\u003e238-10202302S Manual Transmission 2018+\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eFitment is confirmed on 2024+ Mustang EcoBoost\/GT with MT-82 transmission. Manual Fitment \u003cstrong\u003eWILL\u003c\/strong\u003e \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNOT \u003c\/strong\u003e\u003c\/span\u003ework on 2018+ Mustang Mach 1 or Dark Horse with Tremec transmission, only on A10 auto.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Manual MT82 2015-17","offer_id":30301865869384,"sku":"238-10045511S","price":1540.83,"currency_code":"GBP","in_stock":true},{"title":"Automatic 6 spd 2015-17","offer_id":30301865902152,"sku":"238-10045510S","price":1415.83,"currency_code":"GBP","in_stock":true},{"title":"GT Manual 6 spd 2018+","offer_id":42518930391258,"sku":"238-10202302S","price":1332.5,"currency_code":"GBP","in_stock":true},{"title":"Automatic 10 Spd 2018+","offer_id":42518930456794,"sku":"238-10202303S","price":1415.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/Steeda_Aluminium_driveshaft_for_S5550_Mustang.jpg?v=1726048117"},{"product_id":"steeda-s550-billet-front-rear-arb-mount-kit","title":"Steeda Mustang Billet Front \u0026 Rear Anti Roll Bar Mounts 2015-2024+","description":"\u003cp\u003eAnti Roll Bars usually come with stamped steel brackets that mount your bar to the body of your Mustang. These steel brackets are enough to do the job, but here at Steeda we want to provide you with a product that will go above and beyond that.\u003c\/p\u003e\n\u003cp\u003eCNC machined from beautiful billet aluminium, this Steeda Mustang Front and Rear Sway Bar Mount Kit accept our larger HD rear and front sway bar with it's high-durometer urethane bushings, included in the kit. Unlike stamped steel brackets, these brackets don't flex under hard cornering, which helps the suspension perform the way it needs to be for better handling.\u003c\/p\u003e\n\u003cp\u003eFits GT, Mach 1, Bullitt, Dark Horse \u0026amp; Ecoboost models\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh quality billet construction\u003c\/li\u003e\n\u003cli\u003eFront Mount 1 3\/8\" \/ 34.9 mm\u003c\/li\u003e\n\u003cli\u003eRear Mount 1\" \/ 25 mm\u003c\/li\u003e\n\u003cli\u003eWill not flex under hard cornering\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart Number:\u003cbr\u003e555-8145 : Rear Only\u003cbr\u003e555-8148: Front Only\u003cbr\u003e555-8149: Front \u0026amp; Rear Set\u003c\/p\u003e\n\u003cp\u003eNOTE: Rear Billet Mounts will NOT work with Dark Horse + Steeda COMPETITION rear roll bar (555-1034) relocate bracket on EU spec cars.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Front \u0026 Rear","offer_id":30301865967688,"sku":"555-8149","price":295.0,"currency_code":"GBP","in_stock":true},{"title":"Front","offer_id":30301866000456,"sku":"555-8148","price":149.17,"currency_code":"GBP","in_stock":true},{"title":"Rear","offer_id":30301866033224,"sku":"555-8145","price":165.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/555-8149-steeda-front-rear-billet-sway-bar-mounts-big_684e8ca8-82df-4305-b66c-41f7182d9fa9.jpg?v=1764582795"},{"product_id":"steeda-s550-mt-82-tri-ax-race-short-shifter-gt","title":"Steeda Mustang GT MT-82 Tri-Ax Race Short Shifter (2015-2024+)","description":"\u003cp\u003eWith the replacement of your factory shifter assembly with our short throw shifter, you will notice a 30% reduction in throw between gears. Our shifter assembly will also lower the shift knob by 1\" (25mm) , putting it in a better 'power' shifting position. Our Steeda S550 \u0026amp; S650 Mustang MT-82 Tri-Ax Race Short Throw Shifter is quieter than the stock shifter during daily driving, although during race applications you may notice a slight NVH increase.\u003c\/p\u003e\n\u003cp\u003eThe Race Shifter can retain the factory shift knob, and keeps the pull-up style reverse lockout and backup camera functionality. You can also choose one of our great after market knobs.\u003cbr\u003e\u003cbr\u003eOne of the great benefits to this shifter assembly is that it's completely top-loaded. Our short throw shifter comes with 2 different spring set options for a fully adjustable shifting experience. The kit comes complete with 2 medium-resistance springs and 2 high-resistance springs. The Steeda Tri-Ax has adjustable return springs to fit every drivers' preference on shifter feel. Using an offset spring tension ensures that you hit your 2nd-3rd gear change every time. Since our S550 \u0026amp; S650 MT-82 short shifter is top-loaded, once the base plate is mounted, you can change all of your springs, levers and other options all from inside the car without taking out the full shifter assembly!\u003cbr\u003e\u003cbr\u003eOur Tri-Ax shifter features rigid mounting in the front and Steeda poly bushing in the rear, virtually eliminating slop and shifter deflection. With less deflection you will feel a much more direct gear change. The assembly is transmission and chassis-mounted so you don't get the 'walking' affect of a fully transmission-mounted assembly, all while still gaining a more rigid shifter feel. Factory shift shaft bushings are replaced with wider, high-quality machine-finished, low-friction bushings. Tolerances are controlled up to a half thousandth of an inch to ensure OE-quality fitment, alignment and shaft actuation. These features alone make our Steeda Tri-Ax one of the most positive feeling shifters on the market today. To top it all off, our Steeda Mustang GT shifter assembly includes Dynamat sound-deadening material to close out your transmission tunnel and ensures your Mustang GT stays as quiet as the stock assembly.\u003cbr\u003e\u003cbr\u003eSteeda's S550 \u0026amp; S650 Mustang MT-82 Tri-Ax Race Short Throw Shifter is manufactured from high-quality aircraft-grade aluminium making it 20% lighter than the competitions' shifter assemblies. The shift lever itself on our Tri-Ax is made from heat-treated and nickel-plated 4140 steel, making it the strongest part out on the market. All hardware is stainless steel for the highest corrosion-resistance possible. Included in our kit is hardware to tighten up the factory shift knob perfectly into a locking position. These parts have been put to the test on the street and the track and are proven not to bind under extreme conditions or temperatures.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e30% throw reduction\u003c\/li\u003e\n\u003cli\u003e20% lighter than the competition\u003c\/li\u003e\n\u003cli\u003eEliminates slop and shifter deflection\u003c\/li\u003e\n\u003cli\u003eShift knob sits 1\" \/ 25mm lower for ideal 'power shifting' position\u003c\/li\u003e\n\u003cli\u003eTop-loaded installation with adjustable springs, in-car assembly\u003c\/li\u003e\n\u003cli\u003eRetains factory pull-up reverse lockout, OE thread pitch, and back-up camera functionality\u003c\/li\u003e\n\u003cli\u003eIncludes Steeda's Shifter Base Bushing Bracket\u003c\/li\u003e\n\u003cli\u003ePrecision-fit bushings for a direct positive feeling shift\u003c\/li\u003e\n\u003cli\u003eLifetime Steeda warranty\u003c\/li\u003e\n\u003cli\u003eRace parts are usually brought in to order.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote \u003c\/strong\u003e- \u003cstrong\u003eNOT FOR MACH ONE or DARK HORSE ( TREMEC SHIFTERS)\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-7317_7318_S550_Tri-ax_race_shifter_NEW_2016.pdf?5887290781899515709\" title=\"Steeda S550 Mustang Race Shifter Install Guide\" target=\"_blank\"\u003eCLICK HERE TO DOWNLOAD THE SHIFTER INSTALL GUIDE\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301870096456,"sku":"555-7317","price":574.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/steeda-s550-mustang-ecoboost-mt-82-tri-ax-race-short-throw-shifter-15-16-ecoboost-555-3718-03.jpg?v=1726047762"},{"product_id":"steeda-s550-mustang-adjustable-bumpstop-kit","title":"Steeda Mustang Adjustable Bumpstop Kit 2015-2024+","description":"\u003cp\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrevents damage and fatigue to the shocks\u003c\/li\u003e\n\u003cli\u003eAdaptable for various vehicle ride heights\u003c\/li\u003e\n\u003cli\u003eDirect replacement of stock components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWorks with all stock shocks and struts EXCEPT GT350 MagneRide\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFor the track.\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e It is not recommended to use these bumpstops on the street. They are designed for use on smooth track surfaces and will provide better handling when cornering. When installed properly and set at the correct height for your springs, the handling of your Mustang is more predictable.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e(NOTE: The shocks on the Performance Pack (PP) \/ EU models has a smaller diameter shaft. Our bumpstops will work, but they will not fit as tight.) Retains stock boots.\u003cbr\u003e\u003cbr\u003eFor Steeda Springs 555-8208, 555-8209. 555-8210, and 555-8212 : Both are to be used at FULL height\u003cbr\u003e\u003cbr\u003eFor Steeda Springs 555-8214,555-8222, 555-8211, and 555-8213 : Both are to be used at SHORT height\u003cbr\u003e\u003cbr\u003eFits ALL Steeda and Koni shocks and struts. Vogtland, KW, and Roush Front will work, rears are under testing.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/555-4445_S550_Bumpstop_Kit_UPDATED.pdf?517\" title=\"Steeda S550 Mustang Bumpstop Installation Guide\" target=\"_blank\"\u003eINSTALL GUIDE- RIGHT CLICK AND SAVE AS\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301872717896,"sku":"555-4445","price":61.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/Steeda-S550-Mustang-bumpstop-kit-555-4445-big_8eea6916-e912-4367-b461-8e98f60cab45.jpg?v=1726047772"},{"product_id":"steeda-s550-mustang-adjustable-diff-bushing-insert-system","title":"Steeda Mustang Adjustable Diff Bushing Insert System (2015-2024+)","description":"\u003cp\u003eUnlike our competitors' kits that will absolutely increase NVH (noise, vibration, harshness), take 3-4 hours to install and force you to permanently modify the rear IRS suspension with a sawzall, Steeda's does not! Steeda's Urethane kit installs in under 1 hour, with no permanent modifications, is adjustable and can be easily removed - it simply doesn't get any better than this!\u003cbr\u003e\u003cbr\u003eMinimize pinion angle changes, increase traction, eliminate wheel hop and differential deflection with Steeda's new kit. Made from high-strength urethane to Steeda's exact specifications and durometers, our kit comes with 2 different bushing options - our red 'street' 80 durometer bushings and our black 'performance' 90 durometer bushings. Both bushing options will increase performance with some or no increase in NVH, a Steeda-exclusive. Mustang diffs can vary a lot so the noise impact can be pretty random! Some cars have noisier diffs from the factory, others less so...\u003c\/p\u003e\n\u003cp\u003eHowever, if you really want zero compliance and a definite increase in noise, then we have the answer for you!!\u003c\/p\u003e\n\u003cp\u003eOur Full Race option offers an Aluminium insert bush instead of Urethane, or get the best of both worlds with our \"Street to Race\" pack, which includes both options\u003cbr\u003e\u003cbr\u003eSteeda's kit adds the strength and support the OEM bushings need to perform the way our customers intended. Once again, this is not a permanent modification - there is no drilling, cutting or pressing required. Simply loosen and remove a couple bolts and this kit installs in less than 1 hour. Bushings are included for both the front and rear differential mounting locations. Grade 10.9 hardware is included with zinc-plated washers.\u003cbr\u003e\u003cbr\u003eNote: For hardcore enthusiasts that want ZERO pinion deflection, try our 555-4440 kit. This kit features aluminum bushing inserts. For race-use only as it will increase NVH and gear noise.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLimits IRS differential movement while increasing traction and eliminating wheel hop\u003c\/li\u003e\n\u003cli\u003eSome or No increase in NVH unlike the competition\u003c\/li\u003e\n\u003cli\u003eEasily removable, not a permanent modification\u003c\/li\u003e\n\u003cli\u003e100% designed, manufactured and made in the USA\u003c\/li\u003e\n\u003cli\u003eInstalls in 1 hour or less\u003c\/li\u003e\n\u003cli\u003eOptions to suit your need. Urethane for street use or hardcore Race \/ Track Aluminium set up.\u003c\/li\u003e\n\u003cli\u003eThe \"Street to Race\" Pack offers both so you can swap out the bushes for track days etc\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePARTS:\u003cbr\u003e\u003cem\u003e555-4439 - Street Urethane Diff Bush kit - GT V8\u003c\/em\u003e \u003cstrong\u003eDISCONTINUED (OLD)\u003c\/strong\u003e\u003cbr\u003e555-4440 - Race Aluminium Diff Bush kit: - GT V8 \/ EcoBoost\u003cbr\u003e555-4442 - Street to Full Race Combo Kit - GT V8\u003cbr\u003e555-4443 - Street Urethane Diff Bush kit - GT \u0026amp; EcoBoost\u003cbr\u003e555-4444 - Street to Full Race Combo Kit - EcoBoost\u003cbr\u003e\u003cbr\u003e\u003ca title=\"Steeda GT \u0026amp; EcoBoost Mustang S550 Diff Bush Install Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-4443_S550_GT_Ecoboost_install_guide.pdf?609\" target=\"_blank\"\u003eINSTALL GUIDE- CLICK HERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstall Tip\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e: For the 4443 kit: Red \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eB\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eush = Street and Black Bush = harder performance focussed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFitment: All Mustang S550 \u0026amp; S650, including GT, Ecoboost, Bullitt, Mach 1, Dark Horse, GT350, GT350R and GT500 - 2015+\u003cbr\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/mdr4f00toU8\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"GT \/ EcoBoost - Street","offer_id":30301872914504,"sku":"555-4443","price":190.83,"currency_code":"GBP","in_stock":true},{"title":"GT \/ EcoBoost - Race","offer_id":30301872848968,"sku":"555-4440","price":165.83,"currency_code":"GBP","in_stock":true},{"title":"GT Street to Race","offer_id":30301872881736,"sku":"555-4442","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"EcoBoost Street to Race","offer_id":30301872947272,"sku":"555-4444","price":259.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/555-4439-bushing-irs-kit.jpg?v=1726047781"},{"product_id":"steeda-s550-mustang-adjustable-rear-toe-links","title":"Steeda Mustang Adjustable Rear Toe Links (2015-2024)","description":"\u003cp\u003eWhether you daily drive your Mustang in a spirited fashion or you are an auto-cross or road course enthusiast, these Steeda S550 and S650 Mustang Adjustable Rear Toe Links fare a must-have. Our Steeda Rear Toe Links feature over 1-inch of adjustment, making them perfect for street or race use, giving you precise toe alignment for your driving objective.\u003cbr\u003e\u003cbr\u003eOur Steeda Adjustable Rear Toe Links are TIG-welded and powder coated for long-lasting protection and designed to allow for adjustments to be made with the part installed on the car - you do not have to remove this part for toe adjustment!\u003c\/p\u003e\n\u003cp\u003eSee picture below to compare to weak OEM link\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOn-car adjustability\u003c\/li\u003e\n\u003cli\u003ePerfect for lowered cars - provides ultimate toe adjustability\u003c\/li\u003e\n\u003cli\u003eLarge degree of toe adjustment, great for aggressive driving\u003c\/li\u003e\n\u003cli\u003eComes with eccentric block-out plates\u003c\/li\u003e\n\u003cli\u003eNo increase in NVH\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\nFitment: S550 \u0026amp; S650 Mustang - GT \u0026amp; Ecoboost, inc Mach 1 and Bullitt, GT350, Dark Horse\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-4120_S550_adjustable_toe_links_INSTALL_GUIDE.pdf?5887290781899515709\" title=\"Steeda S550 Mustang Adjustable Toe Link Install\" target=\"_blank\"\u003eINSTALL GUIDE- RIGHT CLICK \u0026amp; SAVE AS\u003c\/a\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301873078344,"sku":"555-4120","price":357.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/steeda-s550-mustang-adjustable-rear-toe-link-2015-all-555-4120.jpg?v=1726047791"},{"product_id":"steeda-s550-mustang-adjustable-roll-bar-endlinks","title":"Steeda Mustang Adjustable Roll Bar Endlinks 2015-2024+","description":"\u003cp\u003eSteeda's adjustable stay-bar \/ anti roll bar endlinks make a great upgrade for the stock endlinks as well as the perfect dual-purpose street \/ open-track piece. Perfect for any performance orientated Ford Mustang from 2015+ including the new 2024+ GT \u0026amp; Dark Horse\u003c\/p\u003e\n\u003cp\u003eGreat looking in Steeda blue, they will let anyone taking a peep down below, know that you appreciate \"the Steeda Difference\"\u003cbr\u003e\u003cbr\u003eThe adjustment body is constructed from lightweight aerospace grade aluminium and is corrosion resistant. \u003cbr\u003e\u003cbr\u003eEnd links feature case hardened ball studs that feature significantly increased swing area compared to spherical rod ends. Includes locking hardware for installation.\u003c\/p\u003e\n\u003cp\u003eFor street applications these endlinks are as quiet as the factory units. They will not add NVH (noise, vibration, harshness) like rod end units.\u003cbr\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003cbr\u003eComes with lifetime warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuper Strong- won't bend like stamped OEM links\u003c\/li\u003e\n\u003cli\u003eAdjustable to suit your driving needs\u003c\/li\u003e\n\u003cli\u003eNo added NVH\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart: \u003cbr\u003e555-1040 - FRONT Endlinks only - \u003cspan data-mce-fragment=\"1\"\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003cbr\u003e555-1041 - REAR Endlinks Only - \u003cspan data-mce-fragment=\"1\"\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003cbr\u003e555-1042 - Front \u0026amp; Rear Endlinks Package - \u003cspan data-mce-fragment=\"1\"\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eFitment: \u003cbr\u003eAll S550 Mustangs from 2015+ inc 2018+ GT \u0026amp; Ecoboost\u003cbr\u003eAll S650 Mustangs from 2024+ inc GT, Dark Horse and Ecoboost\u003c\/p\u003e\n\u003cp\u003eSTEEDA TIP! With any adjustable part under the car, cleaning \/ protection and servicing is essential to maintain adjustability. We recommend using a protective spray after installation and regular maintenance.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Front","offer_id":30301873111112,"sku":"555-1040","price":182.5,"currency_code":"GBP","in_stock":true},{"title":"Rear","offer_id":30301873143880,"sku":"555-1041","price":182.5,"currency_code":"GBP","in_stock":true},{"title":"Front \u0026 Rear","offer_id":30301873176648,"sku":"555-1042","price":359.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/5551042-Steeda_Mustang_S550_roll_bar_endlinks.jpg?v=1726047807"},{"product_id":"steeda-s550-mustang-anti-roll-bar-package","title":"Steeda Mustang Anti Roll Bars - Front \u0026 Rear 2015-2024+","description":"\u003cp\u003eSteeda has the track-proven anti roll bar combinations that will give you reduced body roll, adjustability, and the best handling of any sway bar package out on the market.\u003cbr\u003e\u003cbr\u003eOur press-fit welded billet ends are far stronger than stamping the end of the bar. Billet machining construction of the Steeda Mustang Front and Rear Sway Bar ends makes for far greater strength for a bulletproof anti roll bar.\u003cbr\u003e\u003cbr\u003eOur sway bars have machined steel billet sway bar ends, whereas others on the market have coined ends. What does this mean? Our sway bar ends are machined out of billet steel round stock, in-house, on our multi-axis CNC lathes and go through hundreds of computer simulations to ensure the ultimate in strength and performance - this provides greater resistance to bending stresses, and has three major advantages:\u003cbr\u003e\u003cbr\u003eThese parts are less prone to cracking\/fatigue failure on the ends themselves.\u003cbr\u003eIt also reduces unwanted deflection in the sway bar end. Excess deflection creates unwanted geometry changes, which physically changes your sway bar stiffness to a non-ideal rate. With less unwanted deflection, our bars will 'wear out' slower - any spring will eventually become softer over time as it is cycled through its life, our bars will maintain their designed rate for longer with less unwanted deflection.\u003cbr\u003e\u003cbr\u003eOur bar rates are developed and optimized through advanced vehicle dynamic simulation and through extensive real-world testing. We engineered these bars to control the vehicles' roll stiffness properly while still allowing you to run softer springs. This optimizes your overall grip and balance of the vehicle while still allowing you to maintain exceptional ride quality.\u003cbr\u003e\u003cbr\u003eAs a recommended initial \"standard\" setup we advise using the middle of the 3 holes on the rear and the second hole from the end of the bar on the front bar (4 holes). Then adjust to suit driving style, car setup and conditions!\u003cbr\u003e\u003cbr\u003eDon't settle for sway bars that are not track tested and made by companies who do not specialize in Mustangs. Steeda engineers, races, and wins with what it sells, Order the best package for your daily driven or track driven 2015+ Mustang today!\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved handling, more stable cornering\u003c\/li\u003e\n\u003cli\u003eReduced body roll\u003c\/li\u003e\n\u003cli\u003eFront ARB diameter 1-3\/8\" (35 mm)\u003c\/li\u003e\n\u003cli\u003eRear ARB diameter 1\" (25 mm)\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in-house in the USA by Steeda\u003c\/li\u003e\n\u003cli\u003eCompetition and street-proven\u003c\/li\u003e\n\u003cli\u003eIncludes anti roll bar bushing\u003c\/li\u003e\n\u003cli\u003eAs used in our Steeda Q-Series Mustangs\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eNormally in Stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOPTION: Include Steeda Billet Anti Roll Bar brackets - Super Strong and Super Good Looking - Essential for Track Users.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e Front Sway bar will fit vehicles equipped with MagneRide Suspension but cannot be used at softest setting due to contact with factory ride height sensor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePart:\u003cbr\u003e555-1015 Front bar \u003cspan data-mce-fragment=\"1\"\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003cbr\u003e555-1016 Rear bar - \u003cspan data-mce-fragment=\"1\"\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003cbr\u003e555-1017 Front \u0026amp; Rear Roll bars - \u003cspan data-mce-fragment=\"1\"\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFitment:\u003cbr\u003e2015-2023 inc 2018+ GT \u0026amp; Ecoboost, including Bullitt \u0026amp; Mach one\u003cbr\u003e2024+ GT, Ecoboost and Darkhorse\u003c\/p\u003e\n\u003cp\u003eChoose pack from Menu above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTEEDA EUROPE NOTE: \u003c\/strong\u003eThe rear roll bar (555-1016) USED to be 1 1\/4\" (31.75mm) but was redesigned at the end of 2021 to be the same stiffness with a smaller diameter. So older bars will NOT be 1\"\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/0cnkGsT4qCI\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e","brand":"Steeda","offers":[{"title":"Front Roll Bar only","offer_id":30301873406024,"sku":"555-1015","price":357.5,"currency_code":"GBP","in_stock":true},{"title":"Front Roll Bar w\/ Billet Mount","offer_id":30301873438792,"sku":"555-1015_PACK","price":504.17,"currency_code":"GBP","in_stock":true},{"title":"Rear Roll Bar Only","offer_id":30301873471560,"sku":"555-1016","price":257.5,"currency_code":"GBP","in_stock":true},{"title":"Rear Roll Bar w\/ Billet Mount","offer_id":30301873504328,"sku":"555-1016_PACK","price":404.17,"currency_code":"GBP","in_stock":true},{"title":"Front \u0026 Rear Roll Bar Pack","offer_id":30301873537096,"sku":"555-1017","price":582.5,"currency_code":"GBP","in_stock":true},{"title":"Front \u0026 Rear Roll Bars w\/ Billet Mounts","offer_id":30301873569864,"sku":"555-1017_PACKFULL","price":874.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/steeda-roll-bar-package-2015-2022_Mustang_S550.jpg?v=1726047818"},{"product_id":"steeda-s550-mustang-billet-aluminum-vertical-links-delrin","title":"Steeda Mustang Billet Aluminium Vertical Links (2015-2024)","description":"\u003cp\u003eThese Steeda S550 and S650 Mustang Billet Aluminium Vertical Links for 2015-2024 Mustang GT and EcoBoost, will not flex under load like the stock links, and will give a better feel of the rear suspension, which helps the rest of the suspension assembly perform as it should. Compare the OEM vertical links with the Steeda ones in the pictures below to see just how much stronger they are!\u003c\/p\u003e\n\u003cp\u003eThey feature CNC machined delrin bushings or polyurethane bushes and billet steel bushing sleeves and spacers, providing less deflection than the rubber bushings in the stock vertical links, yet does not add any NVH.\u003cbr\u003e\u003cbr\u003eThe Install for Steeda's Mustang Billet Aluminium Vertical Links for 2015-2024 Mustang GT \u0026amp; EcoBoost is simple, and includes all necessary hardware. Also available are our new Poly Bush Vertical Links to give even more focus for handling applications and at a lower price too.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstalls easily, with basic hand tools\u003c\/li\u003e\n\u003cli\u003eProvides better handling characteristics\u003c\/li\u003e\n\u003cli\u003eChoose the bushing to suit you Delrin or Polyurethane\u003c\/li\u003e\n\u003cli\u003eWill not flex under load\u003c\/li\u003e\n\u003cli\u003eNo increase in NVH\u003c\/li\u003e\n\u003cli\u003ePart of our legendary Steeda \"Stop the Hop\" packs!\u003c\/li\u003e\n\u003cli\u003eStandard Fitment on all Steeda Q-Series Mustangs\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eMade in the United States with high grade materials\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart Number \u003cbr\u003e555-4121 - DELRIN BUSH\u003cbr\u003eRecommended for Drag Racing \u0026amp; to eliminate wheel hop - Also High Power builds\u003c\/p\u003e\n\u003cp\u003e555-4129 - POLY BUSH\u003cbr\u003eRecommended for handling applications (Street, Road Racing, AutoX).\u003cbr\u003eFitment: V8 \u0026amp; Ecoboost\u003cbr\u003e\u003cbr\u003eFitment:\u003cbr\u003eS550 Mustangs: 2015-2023 All models including GT350 \u0026amp; GT500\u003cbr\u003eS650 Mustangs 2024+  \u003cstrong\u003eONLY for US Import\u003c\/strong\u003e Non Brembo equipped cars- See below\u003c\/p\u003e\n\u003cp\u003eNOTE: Fits \u003cstrong\u003eNon-Brembo Package\u003c\/strong\u003e (single piston rear caliper) 2024+ Mustang's. If you have a Performance Pack (EU\/UK) or Brembo Package 2024+ Mustang, please see part 555-4130.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.steeda.com\/content\/documents\/555-4129.pdf\" title=\"Steeda Vertical Links Install Guide\" target=\"_blank\"\u003eINSTALL GUIDE - CLICK TO DOWNLOAD\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eSteeda Tip: Make sure they are well lubed on install\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Vert Link - Polybush","offer_id":43072754548954,"sku":"555-4129","price":266.0,"currency_code":"GBP","in_stock":true},{"title":"Vertical Link - Delrin","offer_id":30301873766472,"sku":"555-4121","price":324.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/steeda-s550-mustang-billet-aluminum-vertical-links-2015-POLYBUSH-555-4129-big_9dd6f37d-b7f6-42f1-b5b7-81d86f47ae66.jpg?v=1726047836"},{"product_id":"steeda-s550-mustang-billet-rear-shock-mount-10mm-rear-shocks-oem","title":"Steeda Mustang Billet Rear Shock Mounts 2015-2024+","description":"\u003cp\u003eOnce the aftermarket shocks started coming out for the S550 Mustang, people all across the country ran into issues breaking the factory rear shock mount. Whether it was drag racing or road racing with very stiff shocks, customers were having all sorts of issues. That's when the team at Steeda got together to come up with a solution.\u003c\/p\u003e\n\u003cp\u003eMade from billet 6061 aluminium, these S550\/S650 mounts are designed to replace the weak cast factory units. Unlike the factory mounts that have a rubber bushing that binds and will deteriorate over time on lowered cars or cars with aggressive shock settings, these units feature a Steeda spec stainless steel spherical Teflon lined bearing for optimum performance and control. Unlike other aftermarket mounts, these mounts are compatible with adjustable shocks that utilize a top-mounted adjuster. Steeda also designed this kit to provide 1\/4\" more clearance for wide rear tires! A great way to keep the bearings protected from the elements is to add on the Steeda Rear Shock Mount Covers.\u003c\/p\u003e\n\u003cp\u003eSteeda also went a step further by making five kits (Please review for fitment):\u003cbr\u003e555-8151 :\u003cbr\u003e10mm x 1.0 - Steeda Non-Adjustable Pro-Action Shocks, Koni Non-Adjustable Shocks, KW V3 Adjustable Shocks\u003cbr\u003e10mm x 1.25“ Aftermarket shocks\u003cbr\u003e10mm x 1.5“ OE Ford Shocks, Viking Shocks, Ford Racing Shocks\u003cbr\u003e\u003cbr\u003e555-8152 : \u003cbr\u003e\u003cspan\u003eThis Kit fits Steeda Adjustable Pro-Action Shocks, Koni Adjustable Shocks and other aftermarket shocks with a 12mm shaft.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eIf you are running stock shocks now but might upgrade to Pro-Actions in the future, no problem, there is no drilling required like the OEM mounts, these mounts are upgradable with a simple spacer and nut change ( 555-8153 ). The Steeda Billet Shock Mounts are a great upgrade to drag racers and road racers alike, or if you're running aggressive shocks on your car, these will greatly help with control with uncompromised durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: This rear shock mount is NOT compatible with Magneride applications or Bilstein suspension.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBetter rear shock control\u003c\/li\u003e\n\u003cli\u003eStronger than Stock\u003c\/li\u003e\n\u003cli\u003eBetter (\u003cspan\u003e1\/4\") \u003c\/span\u003einner tyre clearance for \"big tyre\" applications.\u003c\/li\u003e\n\u003cli\u003eBolt-in installation\u003c\/li\u003e\n\u003cli\u003eA must for road racers \/ drag use \/ air ride cars\u003c\/li\u003e\n\u003cli\u003eNo NVH impact just a better ride.\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: NOT suitable for Magneride equipped cars\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePATENTED PART: Only available from Steeda.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/steeda-s550-rear-shock-mount-infographic.jpg?v=1725881879\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePart number \/ Application \/ Thread size\u003cbr\u003e\u003cstrong\u003e555-8151 - ALL 10mm OPTIONS\u003c\/strong\u003e\u003cbr\u003eAll Stock shocks, Steeda Non-Adjust Shocks, Steeda \"Active Shocks\", Viking, Ford Racing and Pedders \/ 10mm-1.5\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e555-8152 - ALL 12mm OPTIONS\u003c\/strong\u003e\u003cbr\u003eSteeda Adjustable Pro Action and Adjustable Koni \/ 12mm-1.25\u003cbr\u003e\u003cbr\u003e555-8153 (Spacer kit)\u003cbr\u003eGo from Stock or Ford Racing to Steeda Adjustable Pro Action or Adjustable Koni \/ 12mm-1.25\u003c\/p\u003e\n\u003cp\u003e555-8160 - DISCONTINUED\u003cbr\u003eNon Adjustable Pro Action and Non Adjustable Koni \u0026amp; KW v3 Adjustables \/ 10mm-1.0\u003cbr\u003e555-8161 - DISCONTINUED\u003cbr\u003eFor Coil over kit. Vogtland \/ Bilstein \/ Roush \/ BC Racing coilover \/ Sleeve, no threads\u003cbr\u003e555-8162 - DISCONTINUED\u003cbr\u003eAirRide \/ 10mm-1.25 custom\u003cbr\u003e\u003cbr\u003eNote: All OEM S550 rear shocks, regardless of package, are 10mm (555-8151), including the aftermarket Ford Racing \u0026amp; Steeda Non Adjustable \/ Active performance units. Aftermarket shocks like Steeda ProAction Adjustables, Koni and Bilstein can be 12mm units (555-8152). Upgrade kits are available if you change shocks later down the road from 10mm-12mm (555-8153).\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTEEDA TIP.\u003c\/strong\u003e\u003cspan\u003e If you want to install a 555-8151 Shock mount with a set of KW Variant 3 Coilovers, you will need to contact us to order a special set of our: 070-997-3013 spacers to allow them to work together. Please contact us PRIOR to ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Steeda S550 Mustang Rear Shock mounts Install Guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/BILLET_rear_Shock_mount_555-8151_555-8152__555-8153_555-8160_555-8161_555-8162-installation-instructions-v11.pdf?v=1615281833\" target=\"_blank\"\u003eINSTALL GUIDE-CLICK HERE\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"555-8151","offer_id":30301874028616,"sku":"555-8151","price":332.5,"currency_code":"GBP","in_stock":true},{"title":"555-8152","offer_id":30301874061384,"sku":"555-8152","price":290.83,"currency_code":"GBP","in_stock":true},{"title":"555-8153","offer_id":30301874094152,"sku":"555-8153","price":69.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/555-8193_Steeda_ShocK_Mount_Dust_caps_cac00862-cc4d-4443-ad81-e2036a2a1de5.jpg?v=1726047854"},{"product_id":"steeda-s550-mustang-billet-rear-spring-spacer-14-inch","title":"Steeda Mustang Billet Rear Spring Spacers 2015-2024+","description":"\u003cp\u003eHave you ever wanted to raise the rear of your Mustang slightly in the rear? Whether it be for larger rear tires or for a little more rake in your stance. Well the team at Steeda designed these 1\/4\" , 1\/8\" or 3\/8\" billet rear spring spacers out of aircraft grade billet aluminium to do just that. A simple install, these spacers go on top of your rear springs to raise the rear of your 2015+ Mustang, including the new S650 2024+ Mustangs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRaise the rear of your car\u003c\/li\u003e\n\u003cli\u003eAvailable in choice of 3 fitments: 1\/4\" (6.35mm) or 3\/8\" (9.5mm) or 1\/8\" (3.175mm)\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelect your size from the option menu at the top.\u003cbr\u003e\u003cbr\u003ePART:\u003cbr\u003e555-8250 - 3\/8\" (9.5mm)\u003cbr\u003e555-8251 - 1\/4\" (6.35mm)\u003cbr\u003e555-8252 - 1\/8\" (3.17mm)\u003cbr\u003e\u003cbr\u003eFitment:\u003cbr\u003eS550 Mustang - 2015-2023 - All\u003cbr\u003eS650 Mustang - 2024+ - All\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTEEDA SELECTION TIP\u003c\/strong\u003e: Due to the setup of the rear suspension, the ride height increase will be approximately \u003cstrong\u003edouble\u003c\/strong\u003e that of the spacer installed, so you can assume around (+ or -)  a 12mm increase with a 6mm spacer.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"9.5mm Spacer","offer_id":30301874225224,"sku":"555-8250","price":74.17,"currency_code":"GBP","in_stock":true},{"title":"6.35mm Spacer","offer_id":30301874257992,"sku":"555-8251","price":52.86,"currency_code":"GBP","in_stock":true},{"title":"3.17mm Spacer","offer_id":30301874290760,"sku":"555-8252","price":52.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/steeda-s550-mustang-billet-rear-spring-spacer-3-4-inch-555-8250-big_b9ffc327-1ed1-4833-88eb-9391cdbbe1fe.jpg?v=1726047870"},{"product_id":"steeda-s550-mustang-camber-plates","title":"Steeda Mustang Camber Plates - 2015 - 2024+","description":"\u003cp\u003eThe factory strut mounts also utilise a bushing style mount resulting in excessive bending stress on your dampers, steering system bind, and may even cause premature failure.\u003c\/p\u003e\n\u003cp\u003eOur Steeda S550 \/ S650 Mustang Camber Plates for Mustang GT and EcoBoost are great for both street and track use. Our camber plates come into play especially when lowering your vehicle. With the addition of our new adjustable strut mounts on your lowered 'Stang you will be able to correct excessive negative camber and increase your front steering response. If you lowered your daily driven S550 or S650 Mustang, running the correct camber will eliminate uneven tire wear.\u003cbr\u003e\u003cbr\u003eOur camber plates are ideal for both daily driving or tracking your S550. With the addition of these camber plates you will be able to dial in precise front suspension camber for each front toe adjustments resulting in a more balanced and predictable vehicle on the street or track. You will notice improved overall handling capabilities, elimination of under steer and increase in your Mustang's turn-in response. In testing, we have seen maximum lateral acceleration increase by .11 G's post-installation of our Steeda S550 Mustang Camber Plates. Maximum lateral acceleration may vary depending on other variables such as tires or outside weather factors. It also makes adjusting between your track set up and street driven alignments a cinch! Just jack up the car, loosen the bolts off and move to your marked position!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for any lowered street or track Mustang\u003c\/li\u003e\n\u003cli\u003eReduce excessive uneven tire wear which can result from lowering your car\u003c\/li\u003e\n\u003cli\u003eMost adjustment range on the market: adjust camber angle from -0.3 degrees to -2.8 degrees\u003c\/li\u003e\n\u003cli\u003eHighest quality, stainless steel, Teflon-lined bearings included\u003c\/li\u003e\n\u003cli\u003eNickel-plated bearing housing, Tig-welded and CNC machined to exact tolerances\u003c\/li\u003e\n\u003cli\u003eGrade 10.9 hardware and nylock nuts included\u003c\/li\u003e\n\u003cli\u003eIncreased front grip, turn-in response and cornering performance\u003c\/li\u003e\n\u003cli\u003eReduced under steer\u003c\/li\u003e\n\u003cli\u003eIncrease overall cornering capability by .11 G's\u003c\/li\u003e\n\u003cli\u003eNo increase in NVH\u003c\/li\u003e\n\u003cli\u003eSpecifically designed for the S550 \u0026amp; S650 chassis and front suspension system\u003c\/li\u003e\n\u003cli\u003eStandard Fitment on all Steeda Q-Series Mustangs\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with KW V3 Coilovers\u003c\/li\u003e\n\u003cli\u003eNo permanent modifications required\u003c\/li\u003e\n\u003cli\u003eSteeda American-made quality, backed by a lifetime warranty\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease note: Our camber plates do not include caster adjustment. Ford has given the S550 Mustang 7 degrees of caster right from the factory - typical race car values of caster range from 6 - 8 degrees; any additional caster added to this system will pull the front suspension out of its ideal camber range.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e: Our Steeda S550\/S650 Mustang Camber Plates are compatible with \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eKW Suspension V3 Coliover Kits\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e. Steeda camber plates are \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003enot\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e compatible with Bilstein B14 or B16 suspension kits due to Bilstein's design.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eFitment: \u003cbr\u003eS550 Mustangs All, including MagneRide cars, inc GT, Ecoboost, GT500, GT350, GT350R - 2015-2023\u003cbr\u003eS650 Mustangs- All, including GT, Ecoboost and Dark Horse\u003c\/p\u003e\n\u003cp\u003eSteeda Tip: For ultimate camber adjustability ease and range use our \u003ca href=\"https:\/\/www.steeda.co.uk\/products\/steeda-mustang-strut-tower-cutting-tool-2015-2021-2-3-4-69-85mm\" title=\"Steeda S550 Mustang 2015+ Camber Plate - Strut Tower Cutting tool\" target=\"_blank\"\u003eS550 Strut Tower Cutting tool\u003c\/a\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/WQRkYnvaWB4\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/555-8139-installation-instructions-v2.pdf?v=1688647876\" title=\"S550 Camber Plate Install Guide\" target=\"_blank\"\u003eINSTALL GUIDE: CLICK HERE\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301876584520,"sku":"555-8139","price":374.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/steeda-s550-mustang-camber-plates-15-16-all-555-8139-0.jpg?v=1726047882"},{"product_id":"steeda-s550-mustang-drag-race-rear-sway-bar","title":"Steeda Mustang Drag Race Rear Sway Bar 2015-2024+","description":"\u003cp\u003eThis is the same drag rear sway bar that John Urist runs on the fastest production-based suspension S550 Mustang in the world!\u003c\/p\u003e\n\u003cp\u003eYou can watch Melissa Urist on youtube put down 8.71@161 NMRA Maple Grove Turbo Coyote Shootout, using our Steeda \"\u003ca href=\"https:\/\/steedaeu.myshopify.com\/products\/steeda-s550-mustang-ultimate-irs-stop-the-hop-pack\" title=\"Steeda Stop the Hop Pack for S550 Mustang\" target=\"_blank\"\u003eStop the Hop\u003c\/a\u003e\" pack and our rear drag bar.\u003c\/p\u003e\n\u003cp\u003ePerfect for either GT or Ecoboost. Either way, hit the strip!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstalled on the fastest factory IRS S550 in the world!\u003c\/li\u003e\n\u003cli\u003eDrag Race Rear Sway Bar diameter 1-1\/8\" \/ 28.5mm - Solid\u003c\/li\u003e\n\u003cli\u003eImproved stability during launch\u003c\/li\u003e\n\u003cli\u003eReduced body roll\u003c\/li\u003e\n\u003cli\u003eMachined steel billet sway bar ends, less prone to cracking\/fatigue\u003c\/li\u003e\n\u003cli\u003eCompetition-proven\u003c\/li\u003e\n\u003cli\u003eIncludes sway bar bushings and mounts\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in-house in the USA by Steeda\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur welded billet ends on our Steeda Mustang Drag Race Rear Sway Bar for the S550 Mustang are far stronger than stamping the end of the bar. Billet-machining construction of the sway bar ends makes for far greater strength for a bulletproof sway bar, that can take a beating no matter how much power your S550 is putting down.\u003cbr\u003e\u003cbr\u003eOur line of Steeda sway bars are equipped with machined steel billet sway bar ends, whereas others on the market have coined ends. What does this mean? Our sway bar ends are machined out of billet steel round stock, in-house, on our multi-axis CNC lathes and go through hundreds of computer simulations to ensure the ultimate in strength and performance - this provides greater resistance to bending stresses, and has three major advantages:\u003cbr\u003e\u003cbr\u003eThese parts are less prone to cracking\/fatigue failure on the ends themselves.\u003cbr\u003eBillet sway bar ends reduce unwanted deflection - excess deflection creates unwanted geometry changes, which physically changes your sway bar stiffness to a non-ideal rate.\u003cbr\u003eWith less unwanted deflection, our bars will 'wear out' slower - any spring will eventually become softer over time as it is cycled through its life, our bars will maintain their designed rate for longer with less unwanted deflection.\u003cbr\u003e\u003cbr\u003eOur bar rates are developed and optimized through advanced vehicle dynamic simulation and through extensive real-world testing. We engineered our Steeda Mustang Drag Race Rear Sway Bar to reduce body roll and improve stability during hard launches. The added stability that this solid drag race rear sway bar offers will keep your S550 Mustang pointed straight.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOPTION: upgrade to the Steeda Billet Aluminium Anti Roll Bar brackets - Super Strong and Super Good Looking\u003cbr\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eFitment: \u003cbr\u003eAll S550 Mustangs, in GT, Ecoboost, Mach 1, Bullitt\u003cbr\u003eAll S650 Mustangs in GT, Dark Horse, Ecoboost\u003c\/p\u003e\n\u003cp\u003eNB: This bar is normally a special order item from the US.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSome Melissa Urist Video...because why not!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/b9n_MoqtT6Y\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Roll Bar","offer_id":42383822782682,"sku":"555-1018","price":265.83,"currency_code":"GBP","in_stock":true},{"title":"Roll Bar + Billet Mounts","offer_id":42383822815450,"sku":"555-1018_PACK","price":399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/steeda-mustang-drag-race-rear-sway-bar-2015-2016-gt-ecoboost-v6-555-1018.jpg?v=1726047901"},{"product_id":"steeda-s550-mustang-extreme-g-trac-brace","title":"Steeda Mustang Extreme G-Trac Brace 2015-2024+","description":"\u003cp\u003eOur Extreme G-Trac Brace mounts close to the control arm mounts, and helps strengthen the connection between the control arm mounts, and the rear of the sub frame. This makes the load path more direct, and gives much more effective stiffening, so the suspension geometry doesn't change during high cornering\/chassis loads. Manufactured from super strong chrome moly, alloy steel tube, making it over twice as strong as any mild steel offering.\u003cbr\u003e\u003cbr\u003eNote: Includes G-Trac Brace and installation hardware.\u003c\/p\u003e\n\u003cp\u003e*NOW REDESIGNED for use with S650 Mustangs as well, and includes a Steeda name plate so people know you have \"The Steeda Difference!\"*\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproves suspension compliance\u003c\/li\u003e\n\u003cli\u003eAlso referred to as k-member brace\u003c\/li\u003e\n\u003cli\u003eStiffens front sub-frame\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eClears long tube headers!\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFitment : \u003cbr\u003eS550 Mustang (2015-2023) All models, EXCEPT EcoBoost 2018+Automatic OR GT350 \/ Mach 1 \/ GT500\u003cbr\u003eS650- 2024+ GT - NOT Dark Horse.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTE\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e:\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e This brace does \u003cstrong data-mce-fragment=\"1\"\u003eNOT\u003c\/strong\u003e fit 2018 Ecoboost with A10 auto trans or Mach ONE \/ GT350 \/ GT500 \/ Dark Horse.\u003cbr\u003eMach One\/ GT350 \/ GT500 \/ Dark Horse owners should purchase 555-5535 instead\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e.\u003c\/span\u003e( our \u003ca href=\"https:\/\/steeda.co.uk\/products\/steeda-s550-mustang-ultralite-2-point-g-trac-brace\" title=\"Steeda S550 \u0026amp; S650 Mustang 2 Point front G Trac brace\" rel=\"noopener\" target=\"_blank\"\u003e2 point Brace\u003c\/a\u003e )\u003cbr\u003e\u003cbr\u003eVideo shows old model 555-5532 K Brace. This Brace design replaces it.\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"4 point G track Brace install guide for S550 and S650 Mustangs\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/555-5536-installation-instructions-v1.pdf?v=1771405391\"\u003eINSTALL GUIDE - CLICK HERE\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301899751496,"sku":"555-5536","price":249.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/555-5536-K-Brace.jpg?v=1726047911"},{"product_id":"steeda-s550-mustang-front-ride-height-spacer-kit-oem","title":"Steeda Mustang Front Ride Height Spacer Kit 2015-2024+","description":"\u003cp\u003eHave you ever wanted to raise your Ford Mustang slightly in the front? Then our Mustang front ride height kits are for you. Perfect for any Mustang from 2015 onwards we even have a set up for those with Steeda Camber Plates. - Just select from the drop down above.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRaise the front of your car to prevent rubbing or achieve the perfect desired stance\u003c\/li\u003e\n\u003cli\u003eAdjustable added height from 1\/8\" to 1\/2\" (3.1mm - 12.7mm)\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLIFETIME warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Upper strut mount is not included.\u003cbr\u003e\u003cbr\u003eMPN:\u003cbr\u003e555-8254 - use with OEM suspension\u003cbr\u003e555-8255 - use with Steeda Camber Adjust Top Mounts\u003cbr\u003e\u003cbr\u003eFitment:\u003cbr\u003eS550 Mustang 2015-2023 - All\u003cbr\u003eS650 Mustang 2024+ - All\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-8254_Front_Spring_spacer_install_guide.pdf?5887290781899515709\" title=\"Mustang Front Spring Ride Height Adjuster install guide\" target=\"_blank\"\u003eDOWNLOAD INSTALL GUIDE HERE\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"OEM","offer_id":30301905092680,"sku":"555-8254","price":174.17,"currency_code":"GBP","in_stock":true},{"title":"Steeda Camber Adjust Top Mounts","offer_id":30301905125448,"sku":"555-8255","price":174.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/555-8254-front-spring-Spacer-kit2-zoom_2cb41432-c4ee-4a4b-81fd-e25a48f0b3eb.jpg?v=1726047924"},{"product_id":"steeda-s550-3-catback-system","title":"Steeda Mustang GT V8 3\" Catback System (2015-2017) (2024+)","description":"\u003cp\u003eSteeda is proud to introduce our new 3\" diameter Cat-Back Exhaust System for the 2015-2017 Ford Mustang Fastback GT. We have designed this system to bring out the performance in your American made muscle car. Our cat-back exhaust design provides maximum horsepower due to the oversized 3\" and the best flow and sound without annoying drone. This system will also fit on US Import non active exhaust 2024+ GT Mustangs\u003cbr\u003e\u003cbr\u003eThis Steeda S550 Axle-Back Exhaust System is constructed from 304-stainless steel for better than OE equivalent corrosion resistance. The tips of our Steeda 3\" cat-back exhaust are constructed from polished 304-stainless steel and are embossed with Steeda's signature Sidewinder logo.\u003cbr\u003e\u003cbr\u003eThe installation of this Cat-Back Exhaust System takes only 2-3 hours using common hand tools.\u003cbr\u003e\u003cbr\u003eIf you are serious about making power, this Steeda S550 Mustang Fastback GT Axle-Back Exhaust System delivers. The 3\" diameter flows adequate whether you have a few add ons or a full blown power adder. Our exhaust kit includes necked down adaptors for a factory style connection to OE converters.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdds deep muscle car tone\u003c\/li\u003e\n\u003cli\u003eGreat daily driving volume with no drone\u003c\/li\u003e\n\u003cli\u003e304 stainless construction provides OE or better corrosion resistance\u003c\/li\u003e\n\u003cli\u003eMaximum horsepower with simple bolts ons as well as full on power adders\u003c\/li\u003e\n\u003cli\u003eCompatible with most full tube headers\u003c\/li\u003e\n\u003cli\u003e4\" diameter chrome tips\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-3615instructions.pdf?224\" title='Steeda 3\" Mustang GT Catback install Guide' target=\"_blank\"\u003eINSTALL GUIDE - CLICK HERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e* Note Automatics can sometimes suffer from increased drone to ultra low revs used by economy seeking software. Often sport mode can cure this. This tip applies to all aftermarket exhausts not just the Steeda system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes not fit convertibles - will Fit NON-ACTIVE (i.e import) S650 V8\u003c\/strong\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301909123144,"sku":"555-3615","price":1165.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/555-3615-1.jpg?v=1726048097"},{"product_id":"steeda-s550-mustang-h-pipe-gt","title":"Steeda Mustang 5.0 Coyote GT H Pipe (2015-2024+)","description":"\u003cp\u003eOur Steeda S550 and S650 Mustang GT Resonator Delete H-Pipe will improve your 5.0L Coyote engine's exhaust flow and overall performance and provide the added benefit of shedding some weight off your Mustang V8 via deleting the stock resonator. Along with increased performance and weight savings, our Steeda H-pipe will give your Mustang an classic muscle car tone. Pair this with our Steeda S550 Mustang Fastback GT Axle-Back Exhaust System for the perfect exhaust tone. Best part of this package is you do not need to delete the catalytic converters which keeps your Mustang legal.\u003cbr\u003e\u003cbr\u003eSteeda's 304SS Resonator Delete H-Pipe for your 5.0L, Coyote-powered S550 and S650 Mustang GT is a great way to improve sound and increase performance at minimal cost, all while losing up to 7 pounds of weight.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eX or H?\u003c\/strong\u003e\u003cbr\u003eAn \"X\" design, with its smooth transition, creates more scavenging effect than traditional \"H\" designs for increased power at high RPMs and a race inspired exhaust note. The H pipe gives a rumblier more classic \"muscle car\" sound.\u003c\/p\u003e\n\u003cp\u003eTherefore at Steeda Europe we say :\u003c\/p\u003e\n\u003cp\u003ePerformance Priority \/ Aggressive racier sound = X pipe.\u003cbr\u003eClassic muscle car rumble = H pipe.\u003cbr\u003e\u003cbr\u003eWith mandrel bent 2.5\" diameter tubing, the pipe easily installs between the factory catalytic converters and the factory mufflers. It is also compatible with virtually all aftermarket axle back exhaust kits. The T-304 stainless steel mandrel bent tubing will not develop surface rust typical with 409 stainless or rust completely through like aluminized mild steel. The flush fit exhaust clamps allow for shortening of the H pipe if needed and prevent exhaust leaks common with expanded end kits.\u003c\/p\u003e\n\u003cp\u003eThe H pipe is a great upgrade to your 2018+ Active Exhaust system allowing a more aggressive and sporty tone when in sport or race mode but still staying nicely compliant when note.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\"H\" design improves exhaust flow over factory resonator and \"gives a classic muscle V8 rumble\u003c\/li\u003e\n\u003cli\u003eH design brings classic V8 inspired exhaust tone\u003c\/li\u003e\n\u003cli\u003e304SS will not rust like inferior 409SS or aluminized steel pipes\u003c\/li\u003e\n\u003cli\u003eSheds up to 7 lbs weight\u003c\/li\u003e\n\u003cli\u003eDoes not require tune\u003c\/li\u003e\n\u003cli\u003eFits 2015+ Mustang GT\u003c\/li\u003e\n\u003cli\u003eImproved design to work with 2018+ and 2024+\u003c\/li\u003e\n\u003cli\u003eRetains catalytic converters to keep your Mustang compliant\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003cspan data-mce-fragment=\"1\" style=\"color: #ffffff;\"\u003eS7213409\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFitment: All 2015+ S550 \u0026amp; S650 GT Mustangs, including Bullitt and Mach 1 and Dark Horse\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-3611-555-3619_S550_h-pipe-instructions.pdf?v=1709893765\" title=\"Steeda Mustang GT H Pipe Install Guide\" rel=\"noopener\" target=\"_blank\"\u003eINSTALL GUIDE - CLICK HERE\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301909319752,"sku":"555-3619","price":249.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/Steeda_S550_H-pipe_2018_555-3619_1.jpg?v=1726047931"},{"product_id":"steeda-s550-mustang-heavy-duty-braided-clutch-line","title":"Steeda Mustang Heavy Duty Braided Clutch Line (2015-2024+)","description":"\u003cp\u003eThe Steeda S550 \/ S650 Mustang Heavy Duty Braided Clutch Line for your 2015-2024+ Mustang GT or EcoBoost with the MT-82 manual 6 speed transmission installs easily directly replacing the factory hydraulic line. Includes all fittings and o-rings!\u003cbr\u003e\u003cbr\u003eA perfect track day mod to help deal with increased track temperatures.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined OEM style fittings\u003c\/li\u003e\n\u003cli\u003eIncludes fittings and o-rings\u003c\/li\u003e\n\u003cli\u003eImproved Clutch feel\u003c\/li\u003e\n\u003cli\u003eEasy installation\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eOnly fits S550 or S650 with the \u003cspan data-mce-fragment=\"1\"\u003eMT82 transmission, will not fit the Tremec in the Mach 1 or Dark Horse\u003c\/span\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301909942344,"sku":"555-7016","price":107.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/555-7016-Steeda-S550-Braided-Cluitch-Line-big_df2a26d6-b68a-4c2c-b14e-3996ebb4dfe2.jpg?v=1726047939"},{"product_id":"steeda-s550-mustang-illuminated-door-sill-plates","title":"Steeda Mustang Illuminated Door Sill Plates 2015-2024+","description":"Our Steeda S550 and S650 Mustang Illuminated Door Sill Plates light up with the \"Steeda\" logo and function just like the factory illuminated door sills turning on and off when the door opens and closes. If you have Ford's MyColor® System option on your S550, our Steeda door sills have the benefit of working in unison with the system allowing you to customize the color light your illuminated doors sills give off. If you chose not to go with the MyColor® System you can still use the provided wiring to make your door sills illuminate white, red, blue or green. If you did not have factory illuminated door sills this kit will still work in your S550 or S650 and you have the same option to choose from white, red, blue or green light.\u003cbr\u003e\u003cbr\u003eThese Steeda illuminated door sills are made in the USA using OE quality materials. Our kit comes complete with driver and passenger side doors sills, and all necessary hardware for installation. They will work on any GT, Bullitt, Mach 1, GT350, GT500, Dark Horse or EcoBoost Mustang with or without factory illuminated doors sills. The kit includes step by step instructions for wiring up these door sills to your Mustang without factory illuminated door sills.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eIlluminates with \"Steeda\" logo\u003c\/li\u003e\n\u003cli\u003eIncludes driver and passenger side illuminated door sills\u003c\/li\u003e\n\u003cli\u003eAdd Steeda flair to your interior\u003c\/li\u003e\n\u003cli\u003eStandard Fitment on all Steeda Q-Series Mustangs\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWorks with Ford's MyColor ambient lighting system\u003c\/li\u003e\n\u003cli\u003eWorks on Mustangs with or without factory illuminated door sills\u003c\/li\u003e\n\u003cli\u003eFunctions just like an OE illuminated door sill\u003c\/li\u003e\n\u003cli\u003eMustangs without MyColor System can wire to illuminate white, red, blue or green\u003c\/li\u003e\n\u003cli\u003eManufactured in the USA using OE quality materials\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFitment: Mustang S550 \u0026amp;S650 all - 2015-2024+\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301915938888,"sku":"067-1511-7030-01","price":407.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/steeda-s550-mustang-hood-strut-kit-2015-all-555-0687-4-zoom_bb34cbe5-069d-483a-ae5b-803dfdea2ed9.jpg?v=1759433429"},{"product_id":"steeda-s550-mustang-irs-base-pack","title":"Steeda Mustang IRS Base Pack 2015-2024+","description":"\u003cp\u003e\u003cstrong\u003eProduct Benefits - Our ONLY \"Must Have\" Part. Trust us, Just fit it! \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOur IRS Subframe Bushing Support system fills in all factory voids in order to eliminate movement of the IRS subframe\u003c\/li\u003e\n\u003cli\u003eUtilizes all 4 factory mounting locations, which completely restricts shifting or rotation (Competitors only support 2 locations)\u003c\/li\u003e\n\u003cli\u003ePractically no added weight to the vehicle\u003c\/li\u003e\n\u003cli\u003eUses precision machined Delrin sleeves which adds no NVH and limits vibration to the vehicle\u003c\/li\u003e\n\u003cli\u003eCNC Machined parts for a precision fit unlike welded and stamped parts with slotted holes\u003c\/li\u003e\n\u003cli\u003eAligns AND holds the subframe in place, in all 4 mounting locations\u003c\/li\u003e\n\u003cli\u003eEasy installation, can be done in under 2 hours\u003c\/li\u003e\n\u003cli\u003eStandard Fitment on all Steeda Q-Series Mustangs\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMore cost effective than others on the market to control wheel hop\u003cbr\u003e\u003cbr\u003eWe combined our ever so popular \u003ca href=\"https:\/\/steedauk.myshopify.com\/products\/steeda-s550-mustang-irs-subframe-alignment-kit\" title=\"Steeda 555-4438 IRS Alignment Bushes\"\u003e555-4438 IRS Alignment Bushes\u003c\/a\u003e and \u003ca href=\"https:\/\/steedauk.myshopify.com\/products\/steeda-s550-mustang-irs-subframe-bushing-support-system\" title=\"Steeda S550 IRS Subframe Support Bushes\"\u003e555-4437 IRS Subframe Support Bushes\u003c\/a\u003e kits into a money savings combo kit where you the customer benefits! The S550's subframe mounting holes are very large compared to the subframe mounting bolts. Since there is a large difference in bolt and hole size, the subframe can be mis-aligned from the factory up to 1\/2\" left to right. The Steeda S550 Mustang IRS Subframe Alignment Kit is made from CNC-machined Delrin to avoid putting two dissimilar metals next to each other, preventing corrosion. Delrin is also less weight than aluminium or steel inserts and therefore keeping performance in mind. The Delrin sleeves slide into the subframe mounting holes, and fill the extra space left between the subframe mount and bolt from the factory therefore eliminating any movement.\u003cbr\u003e\u003cbr\u003eOur Steeda S550 \/ S650 Mustang IRS Subframe Alignment Kit guarantees that the subframe will be bolted to the same location every time it is lowered. Eliminating the need for unnecessary subframe alignments.\u003cbr\u003e\u003cbr\u003eThese Steeda S550 \u0026amp; S650 Mustang IRS Subframe Bushing Support System for your 2015+ Mustang GT, \u0026amp; EcoBoost, gives the rear end a much more solid feel with no increase in NVH at all. The Steeda IRS Subframe bushings eliminate rear subframe movement notorious in the 2015+ Mustang GT \u0026amp; EcoBoost. A stiffened subframe allows the car to increase traction to the rear wheels and is the first step towards eliminating wheel hop. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cbr\u003eThe Steeda S550 Mustang IRS Subframe Bushing Support System for your \u003cstrong\u003e2015+ \u0026amp; 2024+ Mustang GT, Bullitt, Dark Horse, \u0026amp; EcoBoost\u003c\/strong\u003e are easy to install, with basic hand tools. The Steeda IRS bushing kit also does not require any permanent modifications to the car. Also perfect to help control your GT500!\u003c\/p\u003e\n\u003cp\u003eIRS Base Pack - 555-4437, 555-4438\u003cbr\u003eIRS Full Pack - \u003cspan\u003e555-4437, 555-4438, 555-5754\u003cbr\u003e\u003cbr\u003eFor gT350 and Mach 1 use our specific kit: \u003ca href=\"https:\/\/www.steeda.co.uk\/products\/steeda-s550-irs-alignment-bushes-mach-one-gt350\"\u003eSteeda S550 IRS Subframe Support Bushes - Mach One \/ GT350\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guides:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-4437-B_S550_IRS_Bush_kit_INSTALL_GUIDE.pdf?5887290781899515709\" title=\"Steeda IRS 555-4437 Install Guide\" target=\"_blank\"\u003e555-4437 Install Guide\u003c\/a\u003e \u003cstrong\u003eNOTE: 555-4437 DOES NOT FIT MACH ONE \/ GT350\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/Steeda_S550_Mustang_IRS_Subframe_Alignment_Kit__2015_All__555-4438.pdf?5887290781899515709\" title=\"Steeda IRS Alignment Kit Install guide 555-4438\" target=\"_blank\"\u003e555-4438 Install Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSteeda Tip\u003c\/strong\u003e. For the keen driver we recommend upgrading to our IRS Full Pack which adds the Steeda IRS Rear Subframe Braces for extra connection to the chassis, for enhanced control and driveability.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"IRS Base Pack","offer_id":35899123269799,"sku":"555-4450","price":232.5,"currency_code":"GBP","in_stock":true},{"title":"IRS Full Pack","offer_id":43072754254042,"sku":"IRS-PACK-FULL-A","price":549.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/555-4450_Steeda_IRS_Base_Pack.jpg?v=1726047954"},{"product_id":"steeda-s550-mustang-irs-full-pack","title":"Steeda Mustang IRS Full Pack - 2015 to 2024+","description":"\u003cp\u003eWith the release of the new S550 Mustang, Steeda knew that addressing the IRS system would be a top priority. Being the first production Mustang with an IRS since the 03\/04 Cobra's, we knew there would be a great opportunity to capitalize on Ford's new piece by giving it the Steeda advantage. As with any suspension system, deflection is an issue if it's present. Anytime a piece is moving, twisting or vibrating when it should be stationary is a major problem. One of the areas team Steeda wanted to focus on was the rear IRS subframe.\u003cbr\u003e\u003cbr\u003eAs you have seen with our IRS Subframe Bushing Support System, it limits the movement of the subframe by filling in the voids of the OE bushings. With Steeda's IRS Subframe Support Braces, we have taken the S550 and S650 rear suspension to another level!\u003c\/p\u003e\n\u003cp\u003eOur IRS Alignment Bushes simply lock the IRS subframe centrally, something you may be surprised to learn can be up to 1\/2 out of alignment left or right from the factory. As you may guess, having a central alignment is pretty key to a good suspension alignment and so good handling performance!\u003cbr\u003e\u003cbr\u003eWhat we did was tie together 3 very important points on the S550 \/ S650 chassis. We utilized existing threaded holes in the rocker panel (the strongest part of the body) and connected that to the front mounting location of the IRS subframe and the rear mount of the lower control arm and toe link. Connecting these 3 points together not only adds rigidity that was lacking in the rear, but also more control of the whole car.\u003cbr\u003e\u003cbr\u003eAlso, unlike competitors kits that only replace the factory bracket, our Steeda kit supports that bracket while connecting to 2 additional locations, therefore providing twice the support! Best part about this kit is it uses all existing holes in the chassis so the car doesn't have to be modified in any way and adds no NVH whatsoever.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBetter handling for more stable cornering\u003c\/li\u003e\n\u003cli\u003eLimits IRS sub frame movement\u003c\/li\u003e\n\u003cli\u003eNo permanent modifications necessary\u003c\/li\u003e\n\u003cli\u003eNo added NVH\u003c\/li\u003e\n\u003cli\u003e50% more connecting points\u003c\/li\u003e\n\u003cli\u003eReduces wheel hop\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003cli\u003eInstallation does not require removal of cradle\u003c\/li\u003e\n\u003cli\u003ePatent pending\u003c\/li\u003e\n\u003cli\u003eLocks in rear IRS alignment centrally\u003c\/li\u003e\n\u003cli\u003eThe best overall IRS solution on the market!\u003c\/li\u003e\n\u003cli\u003eStandard Fitment on all Steeda Q-Series Mustangs\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFitment:\u003cbr\u003e2015-2023 V8 \u0026amp; Ecoboost, Manual and automatic, including Bullitt and GT500\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e2024+ GT \u0026amp; Dark Horse\u003cbr\u003e\u003cstrong\u003eNot For Convertible or MACH One \/ GT350\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eInstall Guides:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-4437-B_S550_IRS_Bush_kit_INSTALL_GUIDE.pdf?5887290781899515709\" title=\"Steeda IRS Subframe Bushes install Guide\" target=\"_blank\"\u003e555-4437 Install guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/Steeda_S550_Mustang_IRS_Subframe_Alignment_Kit__2015_All__555-4438.pdf?5887290781899515709\" title=\"Steeda IRS Alignment Bushes Install Guide\" target=\"_blank\"\u003e555-4438 Install guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/Steeda_S550_Mustang_Rear_IRS_Subframe_Support_Brace__2015_Coupe_555-5754.pdf?5887290781899515709\" title=\"Steeda IRS Braces Install Guide\" target=\"_blank\"\u003e555-5754 Install guide\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301917675592,"sku":"IRS-PACK-FULL","price":549.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/steeda-s550-mustang-rear-irs-FULLPACK_caf6881c-c911-45b6-a8e7-320e507430f3.jpg?v=1726047967"},{"product_id":"steeda-s550-mustang-irs-subframe-alignment-kit","title":"Steeda Mustang IRS Subframe Alignment Kit 2015-2024+","description":"\u003cp\u003eThe S550's subframe mounting holes are very large compared to the subframe mounting bolts. Since there is a large difference in bolt and hole size, the subframe can be mis-aligned from the factory up to 1\/2\" left to right.\u003cbr\u003e\u003cbr\u003eThe Steeda S550 Mustang IRS Sub-frame Alignment Kit is made from CNC-machined Delrin to avoid putting two dissimilar metals next to each other, preventing corrosion. Delrin is also less weight then aluminium or steel inserts and therefore keeping performance in mind. The Delrin sleeves slide into the sub-frame mounting holes, and fill the extra space left between the subframe mount and bolt from the factory.\u003cbr\u003e\u003cbr\u003eOur Steeda S550 \/ S650 Mustang IRS Sub-frame Alignment Kit guarantees that the sub-frame will be bolted to the same location every time it is lowered. Eliminating the need for unnecessary alignments.\u003cbr\u003e\u003cbr\u003eNote: An alignment is needed upon installation due to the fact it could have been misaligned from the factory and with it now being squared in the chassis, some adjustments might need to be made.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAligns subframe to chassis\u003c\/li\u003e\n\u003cli\u003eNo increase in NVH\u003c\/li\u003e\n\u003cli\u003eEasy to install\u003c\/li\u003e\n\u003cli\u003eNo permanent modifications\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003cli\u003eNo additional hardware needed\u003c\/li\u003e\n\u003cli\u003eStandard Fitment on all Steeda Q-Series Mustangs\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWe HIGHLY recommend installation as part of our \"must have\" \u003ca href=\"https:\/\/steedaeu.myshopify.com\/products\/steeda-s550-mustang-irs-base-pack\" title=\"Steeda S550 Mustang IRS Base Pack\" target=\"_blank\"\u003eIRS Base Pack\u003c\/a\u003e (or select from drop down)\u003c\/li\u003e\n\u003cli\u003eIf you use the BMR CB005 Kit you can choose our \u003ca href=\"https:\/\/steedaeu.myshopify.com\/products\/steeda-s550-mustang-irs-subframe-alignment-kit-bmr-cb005\" title=\"Steeda IRS Alignment Kit - BMR Compatible\" target=\"_blank\"\u003eCB compatible Alignment kit\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePerfect to Install alongside our Springs and the Steeda S550 Mustang IRS Subframe Bushing Support System. Save on install by doing it all together with one alignment on everything after install and a rock solid fantastic set up is ready to go!\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/Steeda_S550_Mustang_IRS_Subframe_Alignment_Kit__2015_All__555-4438.pdf?5887290781899515709\" title=\"Steeda S550 IRS Alignment Kit Install Guide\" target=\"_blank\"\u003eINSTALL GUIDE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFitment: \u003cbr\u003eS550 All Mustangs, including GT, Bullitt, Mach One \/ GT350, GT500 - 2015-2023\u003cbr\u003eS650 All Mustangs including GT, Dark Horse - 2024+\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"555-4438 IRS Alignment Bushes","offer_id":30301923180616,"sku":"555-4438","price":61.67,"currency_code":"GBP","in_stock":true},{"title":"IRS Base Pack","offer_id":43072754155738,"sku":"555-4450A","price":232.5,"currency_code":"GBP","in_stock":true},{"title":"IRS Full Pack","offer_id":43072754188506,"sku":"IRS-PACK-FULL-B","price":549.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/steeda-s550-mustang-irs-subframe-alignment-kit-2015-all-555-4438.jpg?v=1726047976"},{"product_id":"steeda-s550-mustang-irs-subframe-bushing-support-system","title":"Steeda Mustang IRS Subframe Bushing Support System 2015-2026+","description":"\u003cp\u003eThese Steeda S550\/S650 Mustang IRS Subframe Bushing Support System for your 2015+ Mustang GT, Bullitt, Dark Horse \u0026amp; EcoBoost gives the rear end a much more solid feel with no increase in NVH at all. The Steeda IRS Sub frame bushings eliminate rear sub frame movement notorious in the 2015+ Mustang. A stiffened sub frame allows the car to increase traction to the rear wheels and is the first step towards eliminating wheel hop.\u003cbr\u003e\u003cbr\u003eThe Steeda S550 \u0026amp; S650 Mustang IRS Sub frame Bushing Support System for your 2015-2024 Mustang are easy to install, with basic hand tools. The Steeda IRS bushing kit also does not require any permanent modifications to the car.\u003c\/p\u003e\n\u003cp\u003ePart of the Steeda IRS Base Pack (555-4450) the ONLY part Steeda recommend for EVERY Mustang. Whether driving to the shops or driving on the Nürburgring, we say your Mustang NEEDS to have this! Trust us, and thank us after you have installed it...\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases traction\u003c\/li\u003e\n\u003cli\u003eNo increase in NVH\u003c\/li\u003e\n\u003cli\u003eEasy to install\u003c\/li\u003e\n\u003cli\u003eNo permanent modifications\u003c\/li\u003e\n\u003cli\u003eStandard Fitment on Steeda Q-Series Mustangs\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHomologated \/ Certified for European use\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePATENTED PART: Only available from Steeda.\u003c\/p\u003e\n\u003cp\u003eWe recommend purchasing along with our IRS Alignment Bushes as our \u003ca href=\"https:\/\/steedaeu.myshopify.com\/products\/steeda-s550-mustang-irs-base-pack\" title=\"IRS Base Pack for all S550 Mustangs\" target=\"_blank\"\u003eIRS BASE PACK\u003c\/a\u003e (select from drop down above)\u003c\/p\u003e\n\u003cp\u003eFitment:\u003cbr\u003eS550 Mustang, GT V8, Bullitt and Ecoboost, Manual \u0026amp; Automatic, including Convertible 2015-2023 \u0026amp; GT500\u003cbr\u003eS650 Mustang GT, Ecoboost and Dark Horse 2024+\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: DOES NOT FIT MACH ONE \/ GT350 - use part 555-4449 instead\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-4437-B_S550_IRS_Bush_kit_INSTALL_GUIDE.pdf?5887290781899515709\" title=\"Steeda S550 Mustang IRS Subframe Support Bushes install guide\" target=\"_blank\"\u003eINSTALL GUIDE DOWNLOAD\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"555-4437 IRS Subframe Support Bushes","offer_id":30301924163656,"sku":"555-4437","price":190.83,"currency_code":"GBP","in_stock":true},{"title":"IRS Base Pack","offer_id":43072754090202,"sku":"555-4450B","price":232.5,"currency_code":"GBP","in_stock":true},{"title":"IRS Full Pack","offer_id":43072754122970,"sku":"IRS-PACK-FULL-C","price":549.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/steeda-s550-mustang-irs-sub-frame-bushing-support-system-2015-555-4437-11_eb7713c3-4cc9-4217-b868-0775939dcc27.jpg?v=1726047986"},{"product_id":"steeda-s550-mustang-competition-dual-rate-springs","title":"Steeda Mustang MagneRide Ultimate Handling Dual Rate Lowering Springs (2015-2024+)","description":"\u003cp\u003eOur experience and expertise in high performance street and racing suspension systems is second to none, and the team here at Steeda has put that to work for you. Designed for ALL street and road racing applications, Steeda's Competition springs have the highest rates on the market but still maintain a comfortable and enjoyable ride when put on the street. Competition proven in both NASA and SCCA events, these springs greatly reduce nosedive and keep body roll to a minimum for the ultimate in performance handling. These springs provide an optimized centre of gravity and an aggressive stance. Perfected for use with the advanced Ford MagneRide adaptive shocks found on the top-of-the-range Mustangs these springs are the PERFECT complement! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLowers the S550 GT 0.50\" (12.7mm) front \u0026amp; rear  \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLowers S550 GT350 0.50\" \u003cspan data-mce-fragment=\"1\"\u003e(12.7mm) \u003c\/span\u003efront \u0026amp; rear\u003c\/li\u003e\n\u003cli\u003eLowers S650 GT 1.3\" (33mm) front \u0026amp; 0.75\" (19mm) rear\u003c\/li\u003e\n\u003cli\u003eDesigned specifically to work with Magneride cars\u003c\/li\u003e\n\u003cli\u003eStandard fitment on Steeda Q Series Mustangs\u003c\/li\u003e\n\u003cli\u003eCertified for European Use\u003c\/li\u003e\n\u003cli\u003eDesigned for competition racing but maintains outstanding street-able ride\u003c\/li\u003e\n\u003cli\u003eHighest spring rate for dramatic improvement in handling and reduction of nosedive\u003c\/li\u003e\n\u003cli\u003eSteeda collaborates with the best motorsport spring engineers in the industry to provide you the best products possible\u003c\/li\u003e\n\u003cli\u003eSteeda springs are developed using advanced proprietary CAD data, and our exclusive 3D modelling setting us apart from the others\u003c\/li\u003e\n\u003cli\u003eRace proven in NASA and SCCA events- 3 pole positions and 2 wins at PBIR 03\/11\/17 - 2018 SCCA Champions!\u003c\/li\u003e\n\u003cli\u003eThe ULTIMATE performance spring for a Mustang!\u003c\/li\u003e\n\u003cli\u003eLIFETIME warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eS550 \u0026amp; S650 GT Magneride equipped including GT, GT350, Bullitt, Mach One, Dark Horse\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eDoes not fit GT500\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003eFor more info - read our \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/Steeda-S550-Spring-Guide-UPDATED-Aug2018.pdf?v=1583913616\" title=\"Steeda Mustang Springs guide\"\u003eSPRING GUIDE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-8243.pdf?v=1697037967\" title=\"Steeda Magneride Dual Rate Springs Install Guide\"\u003eINSTALL GUIDE\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eLowered amount may vary depending on vehicle package and trim options.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301932159048,"sku":"555-8243","price":457.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/Steeda_S550_555-8246_Dual_rate_competition_Springs.jpg?v=1726047892"},{"product_id":"steeda-s550-drag-springs-linear-15-17-gt","title":"Steeda Mustang GT Drag Springs - Linear (2015-2024+)","description":"\u003cp\u003eOur experience and expertise in high performance street and racing suspension systems is second to none, and the team here at Steeda has put that to work for you. Designed for ALL street and drag racing applications, Steeda's Drag springs are perfect for the drag racer that likes to drive his car to the track. These springs help with weight transfer and planting the rear wheels for maximum traction on launch. \u003cspan data-mce-fragment=\"1\"\u003eThe Steeda Drag springs lower your S550 or S650 Mustang 0.75\" \/ 31.75mm in the front and 0.5\" \/12.75mm in the rear while maintaining optimal rates of 150lb\/in. in the front and 800lb\/in. in the rear. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePair these with our \u003ca title=\"Steeda S550 Mustang Pro Action Shocks\" href=\"https:\/\/steedaeu.myshopify.com\/products\/steeda-s550-mustang-pro-action-shocks-and-struts\" target=\"_blank\"\u003ePro-Action shocks and struts\u003c\/a\u003e as well as other Steeda suspension products such as our \u003ca title=\"Steeda S550 Mustang Stop The Hop Pack\" href=\"https:\/\/steedaeu.myshopify.com\/products\/steeda-s550-mustang-ultimate-irs-stop-the-hop-pack\" target=\"_blank\"\u003eStop The Hop pack\u003c\/a\u003e to make your S550 Mustang a winner!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBetter weight transfer and traction on launch\u003c\/li\u003e\n\u003cli\u003eDesigned for competition racing but maintains outstanding street-able ride\u003c\/li\u003e\n\u003cli\u003eSteeda collaborates with the best motorsport spring engineers in the industry to provide you the best products possible\u003c\/li\u003e\n\u003cli\u003eSteeda springs are developed using advanced proprietary CAD data, and our exclusive 3D modelling setting us apart from the others\u003c\/li\u003e\n\u003cli\u003eLIFETIME warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRace parts are brought in to order normally.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-8231_555-8232.pdf?v=1697037967\" title=\"555-8231 Springs Install Guide\"\u003eINSTALL GUIDE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFitment: All 2015+ S550 and S650 Mustangs - \u003cstrong\u003eNON Magneride\u003c\/strong\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301932290120,"sku":"555-8231","price":365.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/Steeda-S550-Mustang-555-8231-drag-springs-big_a2fcd9ad-ac03-48dd-b8bc-660e339bc125.jpg?v=1726047746"},{"product_id":"steeda-s550-minimum-drop-lowering-springs-linear","title":"Steeda Mustang Lowering Springs - Linear - Minimum Drop (2015-2024+)","description":"\u003cp\u003eA lot of customers want to improve the ride of their Ford Mustang but don't want to lower it much for a variety of reasons. We as ever, Steeda are listening! Better performing ride with minimal drop...here you go!\u003cbr\u003e\u003cbr\u003eOur experience and expertise in high performance street and racing suspension systems is second to none - Put that experience to work for you. Steeda springs are all in house engineered and custom made to our exact specifications. Steeda springs are developed using advanced proprietary CAD data, and our exclusive 3D modelling setting us apart from the others.\u003cbr\u003e\u003cbr\u003eThey optimize the centre of gravity and suspension geometry creating a huge improvement in handling with a noticeable reduction in nose dive, launch squat, and body roll, while still maintaining an outstanding ride quality for daily driving.\u003cbr\u003e\u003cbr\u003eSteeda springs provide the best combinations of handling and ride quality available!\u003cbr\u003e\u003cbr\u003eFront- 200lb\/in 0.5\" drop\u003cbr\u003eRear - 800lb\/in 0.5\" drop\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLowers your S550 0.5\" \/ 12.5mm on all 4 corners\u003c\/li\u003e\n\u003cli\u003eLowers your S650 Mustang Coupe 0.75\" front drop and 0.375\" rear drop (18mm \u0026amp; 9mm)\u003c\/li\u003e\n\u003cli\u003eLowers your S550\/S650 Mustang Convertible 0.75\" \/ 18mm\u003c\/li\u003e\n\u003cli\u003eGreat ride quality, improved aerodynamics and improved vehicle stance\u003c\/li\u003e\n\u003cli\u003eSharper steering response, improved vehicle handling and stability, noticeable reduction in nosedive\u003c\/li\u003e\n\u003cli\u003eIn house engineered and custom made to our exact specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFitment: All S550 \u0026amp; S650 Mustangs (NON-Magneride equipped) 2015+\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-8223.pdf?v=1697037967\" title=\"Steeda minimum Drop Springs Install Guide\"\u003eINSTALL GUIDE\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301932486728,"sku":"555-8223","price":374.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/Steeda_S550_Mustang_Minimal_drop_spring_555-8223.jpg?v=1726047755"},{"product_id":"steeda-s550-mustang-sport-springs-magneride","title":"Steeda Mustang MagneRide Sport Lowering Springs 2018-2024+","description":"\u003cdiv\u003e\n\u003cspan\u003eSprings are the foundation of good handling and ride quality. So start with the best springs for your MagneRide equipped S650 or S550 Mustang, built by the company that specialises in vehicle dynamics and your Mustang!\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eOur experience and expertise in high performance street and racing suspension systems is second to none - Put that experience to work for you. Steeda springs are all in house engineered and custom made to our exact specifications. \u003c\/span\u003eThey optimize the centre of gravity and suspension geometry creating a huge improvement in handling with a noticeable reduction in nose dive, launch squat, and body roll, while still maintaining an outstanding ride quality for daily driving.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIf our standard springs aren't enough for you we also offer our top level performance springs, our Dual Rate \"ultimate Handling\" Springs for MagneRide equipped cars too. \u003c\/div\u003e\n\u003cdiv\u003e\u003ca title=\"Steeda Dual Rate Competition Springs for S550 Mustangs including Magneride\" href=\"https:\/\/steeda.eu.com\/collections\/mustang-s550-gt\/products\/steeda-s550-mustang-competition-dual-rate-springs\" target=\"_blank\"\u003eREAD MORE HERE\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eSteeda springs provide the best combination of handling and ride quality available!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"item\" itemprop=\"description\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eLowers your S550 2015-2023 GT Mustang approx. 1\" \/ 25mm front and rear\u003c\/li\u003e\n\u003cli\u003eLowers your GT350 \/ GT350R approx. 0.5\" \/ 12.75mm front and rear\u003c\/li\u003e\n\u003cli\u003eLowers your S650 GT approx 0.8125\" \/ 20mm front and rear\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGreat ride quality, improved aerodynamics and improved vehicle stance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSharper steering response, improved vehicle handling and stability, noticeable reduction in nosedive\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFits coupe and convertible\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eComes with a LIFETIME warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eFitment: \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eS550 GT MagneRide equipped including GT, Bullitt, Mach One and GT350\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eDoes not fit GT500\u003cbr\u003eS650 GT and Dark Horse, \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ca title=\"555-8242 Magneride Springs install guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-8242.pdf?v=1697037967\"\u003e\u003cspan\u003eMagneride Sport Springs Install Guide\u003c\/span\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eSteeda Tip: We HIGHLY recommend our Dual Rate Springs. unless you are desperate for that extra little bit of drop that the Sport Springs offer, then you will be amazed at what the Dual Rates can do!\u003c\/span\u003e\u003c\/div\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301932552264,"sku":"555-8242","price":365.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/Steeda-Mustang-MagneRide-Springs_2.jpg?v=1726048108"},{"product_id":"steeda-s550-mustang-sport-springs-progressive-gt","title":"Steeda Mustang GT Lowering Springs - Progressive (2015-2024+)","description":"\u003cp\u003eProgressive Springs - lowers front 1.125\" - 28mm and rear 1\" - 25mm\u003cbr\u003e\u003cbr\u003eOur experience and expertise in high performance street and racing suspension systems is second to none - Put that experience to work for you. Steeda springs are all in house engineered and custom made to our exact specifications. Steeda springs were developed using advanced proprietary CAD data, and our exclusive 3 dimensional modelling setting us apart from the others. Whether it's for your GT or EcoBoost Mustang Steeda springs perform like no other!\u003cbr\u003e\u003cbr\u003eThese Steeda Mustang Sport Progressive Springs optimise the centre of gravity and suspension geometry creating a huge improvement in handling with a noticeable reduction in nose dive, launch squat, and body roll, while still maintaining an outstanding ride quality for daily driving. Steeda springs provide the best combinations of handling and ride quality available!\u003cbr\u003e\u003cbr\u003eNote: These Progressive Steeda Mustang Sport Springs - will clear 20\" wheels.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eS550: Lowering 1.125\"\/ 28.5mm in front and 1\" \/ 25.4mm in rear\u003cbr\u003eS650: Lowering 1.3\" \/33mm in front and 0.8125\" \/20.6mm in rear\u003c\/li\u003e\n\u003cli\u003eOur most popular spring!\u003c\/li\u003e\n\u003cli\u003eClears 20\" wheels\u003c\/li\u003e\n\u003cli\u003eGreat ride quality, improved aerodynamics and improved vehicle stance\u003c\/li\u003e\n\u003cli\u003eSharper steering response, improved vehicle handling and stability, noticeable reduction in nosedive\u003c\/li\u003e\n\u003cli\u003eThese progressive springs will provide an exceptional ride quality and as roll increases, it increases the spring rates. Pair with our \"Active\" Shocks for an even better ride!\u003c\/li\u003e\n\u003cli\u003eFits coupe and convertible\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/Steeda_S550_Spring_Guide.pdf?5887290781899515709\" title=\"Steeda Spring selection guide\" target=\"_blank\"\u003eSpring Selector Guide\u003c\/a\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-8208_555-8209_555-8210_555-8211_555-8212_555-8213.pdf?v=1697037967\" title=\"Steeda S550 Mustang Springs install guide\"\u003eINSTALL GUIDE:\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNOTE: \u003cstrong\u003eNOT \u003c\/strong\u003efor MagneRide equipped cars.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":31323392507976,"sku":"555-8210","price":332.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/555-8210-3_spbe-i6.jpg?v=1763805404"},{"product_id":"steeda-s550-mustang-ultralite-springs-linear-gt","title":"Steeda S550 Mustang GT Lowering Springs - Ultralite Linear (2015-2023)","description":"\u003cp\u003eLinear Springs - lowers front 1.125\" and rear 1\" (28mm \u0026amp; 25mm)\u003cbr\u003e\u003cbr\u003eOur experience and expertise in high performance street and racing suspension systems is second to none - Put that experience to work for you. Steeda springs are all in house engineered and custom made to our exact specifications. Steeda springs were developed using advanced proprietary CAD data, and our exclusive 3 dimensional modelling setting us apart from the others.\u003cbr\u003e\u003cbr\u003eThese Steeda Mustang Ultralite Linear Springs optimise the centre of gravity and suspension geometry creating a huge improvement in handling with a noticeable reduction in nose dive, launch squat, and body roll, while still maintaining an outstanding ride quality for daily driving.\u003cbr\u003e\u003cbr\u003eSteeda springs provide the best combinations of handling and ride quality available!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLowers your 2015+ Mustang 1.125\" \/ 28mm in front and 1\" \/ 25mm in rear\u003c\/li\u003e\n\u003cli\u003eGreat ride quality, improved aerodynamics and improved vehicle stance\u003c\/li\u003e\n\u003cli\u003eSharper steering response, improved vehicle handling and stability, noticeable reduction in nosedive\u003c\/li\u003e\n\u003cli\u003eThese linear springs will provide an exceptional ride quality\u003c\/li\u003e\n\u003cli\u003e10% lighter than the Performance Pack springs\u003c\/li\u003e\n\u003cli\u003eFits coupe and convertible\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFitment: 2015+ S550 Mustang GT - NON-Magneride\u003cbr\u003e\u003cbr\u003ePRODUCT HELP:\u003cbr\u003e\"Linear Springs\" provide a steady state of spring weight for ultimate car control.\u003cbr\u003e\"Progressive Springs\" are initially softer, for better ride comfort, and then progressively increase spring rate as the springs are compressed.\"\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-8208_555-8209_555-8210_555-8211_555-8212_555-8213.pdf?v=1697037967\" title=\"Steeda Mustang Lowering Springs Install Guide\"\u003eINSTALL GUIDE\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301932847176,"sku":"555-8211","price":399.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/steeda-mustang-ultralite-springs-linear-2015-gt-v6-555-8211-0.jpg?v=1763805832"},{"product_id":"steeda-s550-mustang-rear-adjustable-camber-arms","title":"Steeda Mustang Rear Adjustable Camber Arms 2015-2024+","description":"\u003cp\u003eThe factory stock camber arm is made to withstand lots of force, but Steeda has found a way to improve the factory camber arm even more. The bushings on the stock camber arms are soft, and just like any soft bushing there is deflection experienced under hard cornering. Bushing deflection causes your wheel and tire to lean outward, letting the tires lose camber while cornering. The loss of camber results in a reduction in grip and makes your powerful Mustang's handling less predictable. Make the most of the money you put into your alignment and tires by maintaining proper camber no matter where you are driving, with our Steeda Rear Adjustable Camber Arms.\u003c\/p\u003e\n\u003cp\u003eThe factory suspension comes with many bushings which also bind and hinder the suspension from articulating. Our Steeda rear camber arms get rid of two of these bushings, eliminating their artificial spring rate and ensuring that your suspension has the lowest amount of friction possible. Let your suspension articulate the way it should with our Steeda Camber Arms.\u003cbr\u003e\u003cbr\u003eOur engineers have gone above and beyond with design, development, simulations, and testing to provide our customers with the highest-quality adjustable camber arms on the market. Our Steeda S550 \/ S650 Mustang Rear Adjustable Camber Arms can be adjusted from +2 degrees camber all the way to -5 degrees camber, more than enough adjustability for any street or race set up. Due to its natural bend design, our Steeda camber arms were brutally strength-tested because of the amount of load this particular suspension component takes on a daily basis.\u003cbr\u003e\u003cbr\u003eOur camber arms completely replace the soft factory bushings with nylon-coated spherical bearings which prevent dirt from penetrating the bearings and ensuring the rod ends will never need to be replaced. The Delrin on one side and spherical bearing on the other side completely rids the deflection of the factory bushings - reducing deflection allows you to maintain proper camber during hard cornering without increasing NVH at all. Maintaining proper camber during cornering allows you to prevent the loss of grip and allows for a more responsive and predictable handling car. This leaves the handling feeling more direct and positive while also making the car much more capable on the track. Stop throwing away money by replacing your unevenly worn tires due to improper rear camber - replace your stock camber arms with Steeda and never look back.\u003cbr\u003e\u003cbr\u003eOur Adjustable Rear Camber Arms are manufactured from Aerospace grade 6061 aluminium for incredible strength. Spherical nylon-lined bearings are made with specific pre-loads imparted on the bearing, ensuring lowest amount of bind on the ball bearing as possible. One of the best features of our camber arm is the adjustability we give you without having to take the part off the car. To adjust your rear camber setting all you need to do is jack up your car, turn the middle nut and you're good to go.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCamber adjustment from -5 degrees to positive 2 degrees\u003c\/li\u003e\n\u003cli\u003eIncreased cornering performance, more predictable handling\u003c\/li\u003e\n\u003cli\u003eGain rear grip\u003c\/li\u003e\n\u003cli\u003ePerfect for Ultra Low cars e.g bagged\u003c\/li\u003e\n\u003cli\u003ePerfect solution for race cars on the Drag Strip who want super vertical rear wheels\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncrease vehicle reaction time\u003c\/li\u003e\n\u003cli\u003eOn-car adjustability\u003c\/li\u003e\n\u003cli\u003eNo increase in NVH\u003c\/li\u003e\n\u003cli\u003ePrevent uneven tire wear on lowered cars\u003c\/li\u003e\n\u003cli\u003eEasy 45 minute install\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-4123-steeda-adjustable-rear-camber-arm-instructions.pdf?v=1714468331\" title=\"Steeda Mustang Rear Adjustable Camber Arms Install Guide\" rel=\"noopener\" target=\"_blank\"\u003eINSTALL GUIDE FOR ADJUSTABLE CAMBER ARMS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFitment: Mustang S550 \u0026amp; S650 - All - 2015-2024+\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTEEDA TIP\u003c\/strong\u003e: Protect \u0026amp; Clean regularly to maintain adjustability!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSTEEDA TIP : \u003c\/strong\u003eThese were designed specifically to account for either \u003cstrong\u003edrag racer use\u003c\/strong\u003e (super vertical) or \u003cstrong\u003eSuper Lowered users\u003c\/strong\u003e (who need extreme camber adjustment) and \u003cstrong\u003eNOT\u003c\/strong\u003e for daily cars or use on Race Circuits. These do need regular care and maintenance. \u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301933764680,"sku":"555-4123","price":790.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/steeda-s550-mustang-rear-adjustable-camber-arms-555-4123-02-zoom_0079eceb-f2e6-4d53-b774-dcd915eaeb8f.jpg?v=1773654049"},{"product_id":"steeda-s550-mustang-rear-irs-subframe-support-braces","title":"Steeda Mustang Rear IRS Subframe Support Braces (2015-2024)","description":"\u003cp\u003eWith the release of the S550 Mustang in 2015 Steeda knew that addressing the IRS system would be a top priority. Being the first production Mustang with an IRS since the 03\/04 Cobra's, we knew there would be a great opportunity to capitalise on Ford's new piece by giving it the Steeda advantage. As with any suspension system, deflection is an issue if it's present. Anytime a piece is moving, twisting or vibrating when it should be stationary is a major problem. One of the areas team Steeda wanted to focus on was the rear IRS sub frame.\u003c\/p\u003e\n\u003cp\u003eAs you have seen with our IRS Sub frame Bushing Support System, it limits the movement of the sub frame by filling in the voids of the OE bushings. With Steeda's IRS Sub frame Support Braces, we have taken the S550 and S650 Mustang rear suspension to another level!\u003cbr\u003e\u003cbr\u003eOur Steeda S550 \u0026amp; S650 Mustang Rear IRS Sub frame Braces for 2015+ Mustang GT, Bullitt, Mach 1, Dark Horse and EcoBoost (non-convertible) is built in-house from 4130 chrome moly steel and powder coated silver metal flake, this part isn't only strong - it also looks great under your new Mustang! What we did was tie together 3 very important points on the S550 and S650 chassis. We utilised existing threaded holes in the rocker panel (the strongest part of the body) and connected that to the front mounting location of the IRS sub frame and the rear mount of the lower control arm and toe link. Connecting these 3 points together not only adds rigidity that was lacking in the rear, but also more control of the whole car.\u003cbr\u003e\u003cbr\u003eAlso, unlike competitors kits that only replace the factory bracket, our Steeda kit supports that bracket while connecting to 2 additional locations, therefore providing twice the support! Best part about this kit is it uses all existing holes in the chassis so the car doesn't have to be modified in any way and adds no NVH whatsoever.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBetter handling for more stable cornering\u003c\/li\u003e\n\u003cli\u003eLimits IRS sub frame movement\u003c\/li\u003e\n\u003cli\u003eNo permanent modifications necessary\u003c\/li\u003e\n\u003cli\u003eNo added NVH\u003c\/li\u003e\n\u003cli\u003e50% more connecting points\u003c\/li\u003e\n\u003cli\u003eReduces wheel hop\u003c\/li\u003e\n\u003cli\u003eFully compatible with Steeda's popular Jacking Rails\u003c\/li\u003e\n\u003cli\u003eStandard Fitment on Steeda Q-Series Mustangs\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/555-5754-installation-instructions-v2.pdf?v=1759589078\" title=\"Steeda IRS Subframe Braces Install Guide for Mustang\" rel=\"noopener\" target=\"_blank\"\u003eINSTALL GUIDE FOR IRS BRACES\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFitment:\u003cbr\u003eS550 Mustang: V8 \u0026amp; Ecoboost, COUPE ONLY Manual and automatic, 2015-2023\u003cbr\u003eS650 Mustang: V8 \u0026amp; Ecoboost, COUPE ONLY \u003cspan\u003eManual and automatic, 2024+\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003eNot For Convertibles\u003cbr\u003e\u003c\/strong\u003eConvertible Mustangs already come with a similar brace from the factory, so this part from Steeda is not required.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTEEDA UK NOTE:\u003c\/strong\u003e\u003cbr\u003eIRS brace rear bolt torque. You can back the torque down on this bolt, as EU rear sub frames are a little lighter than US spec.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301949886536,"sku":"555-5754","price":324.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/steeda-s550-mustang-rear-irs-subframe-brace-2015-coupe-555-5754-0_c4e71446-3b9e-499d-8b2d-4b364b87d546.jpg?v=1726048014"},{"product_id":"steeda-s550-mustang-rear-lower-control-arm-spherical-bearings","title":"Steeda Mustang Rear Lower Control Arm Spherical Bearings (2015-2024)","description":"\u003cp\u003eFrom the factory, the 2015-2024\u003cspan\u003e \u003c\/span\u003eFord Mustang features bushings in the rear control arm that we found to be less than ideal for putting all the 5.0L coyote's power to the ground. The factory bushings deflect upon acceleration and steering inputs causing all sorts of handling issues that are less than ideal. In testing, we found that the factory bushings deflect so much that the rear tires can toe inward upon acceleration over 2 degrees! We created the perfect upgrade for the drag racers out there, our Spherical bearings are a work of art, and a secret weapon for the 1320!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduced deflection\u003c\/li\u003e\n\u003cli\u003eReduced wheel hop\u003c\/li\u003e\n\u003cli\u003eNo NVH increase\u003c\/li\u003e\n\u003cli\u003eEliminates alignment change under power\u003c\/li\u003e\n\u003cli\u003eDecreases vehicle reaction times\u003c\/li\u003e\n\u003cli\u003eCreates more predictable handling\u003c\/li\u003e\n\u003cli\u003eRemoves bind in the suspension to allow it to move freely\u003c\/li\u003e\n\u003cli\u003eBillet aluminium installation tool included\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur Steeda S550 and S650 Mustang Rear Lower Control Arm Spherical Bearings eliminates deflection of the factory bushing which is extremely important in any performance application. Deflection in the factory bushings can cause all sorts of negative handling affects. Our spherical rear lower control arm will correct understeer under acceleration of your S550\/S650 chassis Mustang.\u003cbr\u003e\u003cbr\u003eYou will notice increased chassis responsiveness upon installing our spherical bearings. If you drag race your GT, or EcoBoost Mustang our rear lower control arm spherical bearings will play a huge role in eliminating deflection, ensuring your tyres hook immediately upon acceleration. Our spherical bearings stop your\u003cspan\u003e \u003c\/span\u003eMustang\u003cspan\u003e \u003c\/span\u003efrom building negative toe on launch. In addition to eliminating deflection and complacence of the factory bushings, our spherical bearings will also eliminate the spring rate of the factory bushing which does not allow the suspension to articulate up and down freely.\u003cbr\u003e\u003cbr\u003eOur Steeda S550 \/ S650 Mustang Rear Lower Control Arm Spherical Bearings are manufactured in our state of the art facility in Valdosta, GA from 1018-steel and nickel-plated to prevent corrosion. We use high precision Teflon-lined bearings to ensure smooth operation and prevent bind. This also increases the bearing's life and minimizes the need for it to be replaced. The spherical bearings design unlike most, will not increase NVH whatsoever so you are able to maintain factory ride quality.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSteeda Note:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e This is a part designed for \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDRAG RACING USE. \u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003cstrong\u003eNot \u003c\/strong\u003efor street cars. For road and track cars we offer the perfect upgrade our \u003ca href=\"https:\/\/www.steeda.co.uk\/products\/steeda-s550-mustang-rear-lower-control-arm-bushings-2015-2022\" title=\"Steeda Lower Control Arm Polyurethane Bush replacement for S550 MUstang 2015-2022\"\u003ePolyurethane 555-4047 Bush\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/Steeda-S550-Mustang-Rear-Lower-Control-Arm-Spherical-Bearing-555-4117-Installation-Instructions.pdf?5887290781899515709\" title=\"Steeda Mustang Rear Spherical Bearing Install Guide\" target=\"_blank\"\u003eINSTALL GUIDE - CLICK HERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFitment: GT V8 and 2.3 Ecoboost, inc GT350 and GT500\u003c\/span\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301950017608,"sku":"555-4117","price":265.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/555-4117-2.jpg?v=1688418821"},{"product_id":"steeda-s550-mustang-shifter-base-bushing-bracket-kit","title":"Steeda S550 \/ S650 Mustang Shifter Base Bushing Bracket Kit (2015-2026+)","description":"\u003cp\u003eSteeda S550 and S650 Mustang Shifter Base Bushing Bracket Kit for the MT-82 equipped manual Mustangs significantly improves shifting performance, by providing a much more solid mount for the rear of the shifter. The kit replaces the flimsy, low durometer OE shifter base bushing assembly, with a high-quality polyurethane bushing.\u003cbr\u003e\u003cbr\u003eIt is easy to install and does not require any permanent modifications to the vehicle.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAerospace-grade aluminium\u003c\/li\u003e\n\u003cli\u003eProvides better shifter performance\u003c\/li\u003e\n\u003cli\u003eHigh-quality polyurethane bushing\u003c\/li\u003e\n\u003cli\u003eEasy to install\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/Steeda_S550_Mustang_Shifter_Base_Bushing_Bracket_Kit_install.pdf?5887290781899515709\" title=\"Steeda Mustang Shifter Base Bushing Install Guide\" target=\"_blank\"\u003eINSTALL GUIDE- CLICK HERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFitment: \u003cbr\u003e2015-2023 S550 Mustang GT V8 \u0026amp; Ecoboost, MT-82 manual - \u003cstrong\u003eNOT MACH ONE\u003cbr\u003e\u003c\/strong\u003e2024+ S650 Mustang GT V8 \u0026amp; Ecoboost, MT-82 manual - \u003cstrong\u003eNOT DARK HORSE\u003c\/strong\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301951852616,"sku":"555-7092","price":82.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/products\/steeda-s550-mustang-shifter-base-bushing-2015-555-7092-0-big_d7dc8b57-ae6f-428a-a01b-45e2c112464c.jpg?v=1759433301"},{"product_id":"steeda-s550-ultra-lite-jacking-rails","title":"Steeda Mustang Ultra-lite Jacking Rails 2015 - 2024+","description":"\u003cp\u003ePowder coated wrinkle black for a low key, yet durable finish, these will last a lifetime under your S550 or S650 chassis Mustang. Unlike the competition, Steeda includes Zinc-plated, flange-headed, grade 10.9 hardware - a simple bolt-in design that can be removed at any time as they use factory mounting holes. These allow you to jack up your Mustang with confidence anywhere along the jacking rail, preventing damage to your factory pinch welds. They provide a great point for jack stands and 2 post lifts. Lastly, these will work with Steeda's IRS Subframe Support Braces without interference. Steeda's new Ultra Lite Chassis Jacking Rails add strength and function to your modern muscle car.\u003c\/p\u003e\n\u003cp\u003eSteeda listen to you our customers, so we have further dropped the weight on our jacking rails AND created a Convertible application option as well for those who didn't want to have to alter their rails, as well as developing our new Full Length version which were launched in 2018 to give even better \"jackability.\"\u003c\/p\u003e\n\u003cp\u003eWorking on your car at home? These are what you need.\u003cbr\u003eChanging your wheels at the track? \u003cspan data-mce-fragment=\"1\"\u003eThese are what you need.\u003c\/span\u003e\u003cbr\u003eSurrounded by aggressive speed bumps? These are what you need!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e60% lighter than the competition, only 12 lbs (5.4 kg)\u003c\/li\u003e\n\u003cli\u003eAllows you to jack up your S550 or S650 anywhere along the jacking rail, preventing damage to your factory pinch welds\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eProtects the underside of your car on the street.\u003c\/li\u003e\n\u003cli\u003eOpen mounting bracket design prevents water from getting trapped and therefore eliminating chances of rust\u003c\/li\u003e\n\u003cli\u003eWill work with Steeda's popular IRS Sub frame Support Braces\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary mounting hardware unlike the competition\u003c\/li\u003e\n\u003cli\u003eStandard Fitment on all Steeda Q-Series Mustangs\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHomologated \/ Certified for European use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003cli\u003eConvertible Specific Version available (555-5207)\u003c\/li\u003e\n\u003cli\u003eMade in the USA using high-grade materials\u003c\/li\u003e\n\u003cli\u003eNormally in stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart Number: \u003cbr\u003e555-5205 - Original (Special Order Only)\u003cbr\u003e555-5207 - Convertibles\u003cbr\u003e555-5212 - Full Length\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFitment:\u003cbr\u003eS550 Mustangs: 2015-2023 - All models including GT, Bullitt, Mach 1, Ecoboost, GT500, GT350\u003cbr\u003eS650 Mustangs 2024+ All models including GT, Dark Horse\u003cbr\u003e\u003cbr\u003eNice little video explaining the \"how to and what for\" of jacking your S550 (See media roll):\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" title=\"Steeda S550 \u0026amp; S650 Jacking Rails install guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-5212-s550-mustang-full-length-chassis-jacking-rails-10-2023.pdf?v=1718039700\" target=\"_blank\"\u003eINSTALL GUIDE- CLICK HERE\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eSTEEDA NOTE: You will need to trim underbody panel to fit the rails on the S650 due to its aerodynamic underbody panelling.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"555-5212 - Full Length","offer_id":30301964828744,"sku":"555-5212","price":165.83,"currency_code":"GBP","in_stock":true},{"title":"555-5207 - Convertible","offer_id":43072753271002,"sku":"555-5207","price":240.83,"currency_code":"GBP","in_stock":true},{"title":"555-5205 - Original","offer_id":43072753303770,"sku":"555-5205","price":257.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/steeda-s550-mustang-ultra-lite-chassis-jacking-rails-15-16-all-555-5212.jpg?v=1726048080"},{"product_id":"steeda-sidewinder-decals","title":"Steeda Sidewinder Decals 2015-2023 \u0026 2024+ Mustang","description":"\u003cp\u003eWith subtlety and style you can make your car stand out from the pack.\u003cbr\u003e\u003cbr\u003eAvailable for S550 Mustang 2015-2023 and S650 2024+Mustangs, and in a selection of standard colours, they are made to order on demand, so we can try to create any custom colour you may want as well.\u003cbr\u003e\u003cbr\u003eCustom colours will cost a little extra but please contact us for details.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cbr\u003eFILL IN YOUR COLOUR request in the box in the SHOPPING CART.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePlease note that Sidewinder decals are NOT normally available as a solo purchase\u003c\/strong\u003e, as they are reserved for those special cars that have been given the full Steeda SSV treatment. However they can be bought as part of a pack purchase of parts or if your Ford already has a good selection of Steeda upgrades. Q Series markings are only on official Q Series builds\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301969154120,"sku":"SIDEWINDER2024","price":106.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/Steeda_s650_Sidewinder_Decal.jpg?v=1726048090"},{"product_id":"steeda-windscreen-decal","title":"Steeda Windscreen Decal","description":"\u003cp\u003eFill in your custom request in the text box in the shopping cart check out. Just basic colour \/description request. If you want something very specific or complex, let us know through our CONTACT US page.\u003cbr\u003e\u003cbr\u003eShow that you know what really counts when it comes to Ford Performance, and that your car has \"the Steeda Difference\".\u003cbr\u003eThese are made to order, so please allow a few days for delivery.\u003cbr\u003e\u003cbr\u003eNOTE:\u003cbr\u003eFILL IN YOUR COLOUR request in the box in the SHOPPING CART.\u003cbr\u003e\u003cbr\u003ePlease try and specify colour accurately, eg \"Race Red\" or \"Ruby Red\" and we will try and match to our best ability.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":30301972529224,"sku":"556-WSCRB","price":44.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/products\/Steeda-Windscreen-strip-Graffitti-zoom_83de4d22-c78b-45ec-a68a-54b47cf3645d.jpg?v=1659782933"},{"product_id":"velgen-classic-5-wheel","title":"Velgen VF Classic 5 V2 Wheel - 20\"","description":"\u003cp\u003eHow do you make the best even better? Velgen know how and have taken the Classic 5 to the next level with lightweight technology and stunning design tweaks for a sexier centre and more modern look. Not only do they look even better but the light weight means they are a serious performance boost for your Mustang too.\u003c\/p\u003e\n\u003cp\u003eManufactured using special flow form casting for the best weight and quality for the price, these all new VF version of the beautiful Velgen Classic 5 wheels are available in 5 finishes: \u003c\/p\u003e\n\u003cp\u003eSatin Black \/ Gloss Black \/ Gloss Bronze \/ Gloss Gunmetal \/ Gloss Silver\u003cbr\u003e\u003cbr\u003eWe offer:\u003cbr\u003e20x10\" front and 20 x 11\" rear\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNB: These wheels will not clear the GT350\/GT350R brake kit - a GT350 FITMENT IS available though! Let us know when ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe can also provide wheel and tyre packages on request, using Michelin tyres, our tyres of choice in Europe.\u003cbr\u003e\u003cbr\u003eAll wheels are normally brought in to order via airfreight due to the variety of colours and sizes. \u003c\/p\u003e\n\u003cp\u003eVelgen Wheels offers a 5 Year Manufacture Warranty \u0026amp; LIFE TIME STRUCTURAL WARRANTY.\u003c\/p\u003e\n\u003cp\u003eTo any of our customer's who have a warranty issue, please contact Velgen direct to their warranty department to handle any warranty claims. Velgen's warranty is only for the original purchaser.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTo make a set of Velgens even more accessible we offer payments with KLARNA allowing for interest free payments split over 3 payments\u003c\/p\u003e\n\u003cp\u003eLearn more here:\u003cbr\u003e\u003ca href=\"https:\/\/www.steeda.co.uk\/pages\/klarna-easy-payments\" title=\"Klarna payments with Steeda UK\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/200x200.png?v=1759934201\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Velgen Wheels","offers":[{"title":"Silver - Mustang","offer_id":30301992190024,"sku":"VF_classic_5_SILVER","price":1999.17,"currency_code":"GBP","in_stock":true},{"title":"Gloss Black - Mustang","offer_id":30301992255560,"sku":"VF_classic_5_GLOSSBLK","price":1999.17,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal - Mustang","offer_id":30301992321096,"sku":"VF_classic_5_GUN","price":1999.17,"currency_code":"GBP","in_stock":true},{"title":"Bronze - Mustang","offer_id":30301992386632,"sku":"VF_classic_5_BRZ","price":1999.17,"currency_code":"GBP","in_stock":true},{"title":"Satin Black","offer_id":41503626068135,"sku":"VF_classic_5_Sat_Black","price":1999.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/products\/GlossGunmetalClassic5V2.png?v=1633599844"},{"product_id":"velgen-forged-wheels-range","title":"Velgen Forged Wheels Range","description":"\u003cp\u003eForged wheels are fully customisable and lightweight.\u003c\/p\u003e\n\u003cp\u003eOffering a Dual Block Series, Three Piece Floating Spoke, Forged Mono-Block. Made from 6061-T6 Forged Aluminum. Velgen Forged are machined, finished and built in the USA. Velgen Forged is tested to the following standards SAE, JWL and VIA standards.\u003cbr\u003e\u003cbr\u003eALL forged wheels are built to order, with a huge variety of custom options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCall for advice and to price. \u003c\/strong\u003eYour imagination is the limit.\u003cbr\u003e\u003cbr\u003eNB-This is only on existing design's and profiles that are available.\u003cbr\u003e\u003cbr\u003eWheel range currently:\u003cbr\u003e\u003cbr\u003eDual Block: VFDB 6 - VFDB 7 - VFDB 10\u003cbr\u003eMulti Piece:  VFMP6 - VFMP10 - \u003cbr\u003eMonoblock: VFMBX10 - VFMBX5\u003cbr\u003e\u003cbr\u003ePics show VFMP 10 on bagged S550 Mustang \u003cbr\u003eBronze lip, black spokes and centre, bronze hardware, stepped lip and black barrel.\u003cbr\u003e\u0026amp; \u003cspan\u003e VFMBX5 on GT500 \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo make a set of Velgens even more accessible we offer payments with KLARNA allowing for interest free payments split over 3 payments\u003c\/p\u003e\n\u003cp\u003eLearn more here:\u003cbr\u003e\u003ca title=\"Klarna payments with Steeda UK\" href=\"https:\/\/www.steeda.co.uk\/pages\/klarna-easy-payments\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/200x200.png?v=1759934201\"\u003e\u003c\/a\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Velgen Wheels","offers":[{"title":"Default Title","offer_id":30301994975304,"sku":"","price":5165.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/products\/velgen-forged-vfdb7-1-zoom_89d51cff-77b4-4526-9c63-7a1e0c790da2.jpg?v=1572079781"},{"product_id":"velgen-sl-forged-wheels-range","title":"Velgen SL Forged Wheels Range","description":"\u003cp\u003eStunning wheels and the perfect entry into the wonderful world of forged wheels. Velgens SL (Step Lip) Forged wheels are fully customisable, lightweight and strong.\u003cbr\u003e\u003cbr\u003eA Dual Block Series Made from 6061-T6 Forged Aluminum. Velgen SL Forged are machined, finished and built in the USA. Velgen Forged is tested to the following standards SAE, JWL and VIA standards. For any application from 18\" to 22\"\u003cbr\u003e\u003cbr\u003eALL forged wheels are built to order, with a huge variety of custom options. SOME SL Mustang fitments and colours are available off the shelf and ready to ship. \u003ca title=\"Contact Steeda UK\" href=\"https:\/\/www.steeda.co.uk\/pages\/contact-steeda-uk\"\u003e\u003cstrong\u003eCONTACT\u003c\/strong\u003e \u003c\/a\u003e\u003cstrong\u003e\u003ca title=\"Contact Steeda UK\" href=\"https:\/\/www.steeda.co.uk\/pages\/contact-steeda-uk\"\u003efor advice and to price\u003c\/a\u003e. \u003c\/strong\u003eYour imagination is the limit.\u003c\/p\u003e\n\u003cp\u003eThe SL range is a 2 piece forged wheel. So you can have the face (spokes) in one finish and the Lip \/ Barrell in another finish (or both in the same finish if you prefer). Hardware (i.e the bolts that connect the 2 pieces) can colour match or contrast. Check out the images below for some inspiration!\u003c\/p\u003e\n\u003cp\u003eRANGE:\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Velgen Wheels SL Forged line up for 2020\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/Velgen_SL_Forged_Line_600x600.jpg?v=1589627516\"\u003e\u003c\/p\u003e\n\u003cp\u003eWheel range currently: Dual Block: SL10 or SL9, SL7, SL5\u003c\/p\u003e\n\u003cp\u003eTo make a set of Velgens even more accessible we offer payments with KLARNA allowing for interest free payments split over 3 payments\u003c\/p\u003e\n\u003cp\u003eLearn more here:\u003cbr\u003e\u003ca href=\"https:\/\/www.steeda.co.uk\/pages\/klarna-easy-payments\" title=\"Klarna payments with Steeda UK\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/200x200.png?v=1759934201\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Velgen Wheels","offers":[{"title":"Default Title","offer_id":30301997006920,"sku":"","price":4582.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/products\/WhatsApp_Image_2018-08-28_at_21.37.13.jpg?v=1572079781"},{"product_id":"velgen-vrf5-flow-form-wheel","title":"Velgen VF5 Light Weight Series Wheel - 20\"","description":"\u003cp\u003eSimply the best lightweight quality alloy available for the Mustang? We think so! Welcome to the legend that is the Velgen VF5. Manufactured using a specialised low pressure casting for the best weight and quality for the price. \u003cspan\u003eAs a \u003c\/span\u003e\u003cspan\u003eweight\u003c\/span\u003e\u003cspan\u003e example a 20\" x 10.5 \" VRF 5 weighs ONLY 11.3 KG! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese beautiful wheels are available in 5 finishes:\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSatin or Gloss Black \/ Gloss Bronze \/ Gloss Gunmetal \/ Gloss Silver\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStaggered 20 x 10\" front and 11\" rear\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: GT350 \/ GT500 fitment IS available - Just let us know that is what you want when ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll wheels are brought in to order due to the variety of colours and sizes. If urgent orders are needed they can be air shipped in at extra cost. Air shipments generally add £200 inc vat\u003c\/p\u003e\n\u003cp\u003ePrice is for a set of 4 wheels.\u003cbr\u003eVelgen Wheels offers a 5 Year Manufacture Warranty \u0026amp; LIFE TIME STRUCTURAL WARRANTY. \u003c\/p\u003e\n\u003cp\u003eTo any of our customer's who have a warranty issue, please contact Velgen direct to their warranty department to handle any warranty claims. Velgen's warranty is only for the original purchaser.\u003cbr\u003e\u003c\/p\u003e","brand":"Velgen Wheels","offers":[{"title":"Gloss Black -20\" Wide","offer_id":30302011850824,"sku":"VRF520-STGW-GBK","price":1999.17,"currency_code":"GBP","in_stock":true},{"title":"Gloss Silver - 20\" Wide","offer_id":30302011818056,"sku":"VRF520-STGW-SS","price":1999.17,"currency_code":"GBP","in_stock":true},{"title":"Gloss Bronze - 20\" Wide","offer_id":30302011883592,"sku":"VRF520-STGW-BRZ","price":1999.17,"currency_code":"GBP","in_stock":true},{"title":"Gloss Gunmetal - 20\" Wide","offer_id":30302011916360,"sku":"VRF520-STGW-GM","price":1999.17,"currency_code":"GBP","in_stock":true},{"title":"Satin Black - 20\" Wide","offer_id":30302011949128,"sku":"VRF520-STGW-SBK","price":1999.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/VelgenVF5glossBlack_0efd42b3-f845-41a9-aded-14ed246e33c2.jpg?v=1690921278"},{"product_id":"steeda-mustang-1-5-38mm-massive-front-sway-bar-2015-2020","title":"Steeda Mustang 1.5\" (38mm) Massive Front Anti-Roll Bar (2015-2024+)","description":"\u003cp\u003eStiffest Sway Bar on the market, massive One-and-a-half inch diameter (38mm)!\u003cbr\u003e\u003cbr\u003eSteeda has the track-proven sway bars that will give you reduced body roll, adjustability, and the best handling of any sway bar out on the market.\u003cbr\u003e\u003cbr\u003eOur press-fit welded billet ends are far stronger than stamping the end of the bar. Billet machining construction of the sway bar ends makes for far greater strength for a bulletproof sway bar.\u003cbr\u003e\u003cbr\u003eDon't settle for sway bars that are not track-tested and made by companies who do not specialize in Mustangs. Steeda engineers, races, and wins with what it sells!\u003cbr\u003e\u003cbr\u003eOur sway bars have machined steel billet sway bar ends, whereas others on the market have coined ends. What does this mean? Our sway bar ends are machined out of billet steel round stock, in-house, on our multi-axis CNC lathes and go through hundreds of computer simulations to ensure the ultimate in strength and performance - this provides greater resistance to bending stresses, and has three major advantages:\u003c\/p\u003e\n\u003cp\u003eThese parts are less prone to cracking\/fatigue failure on the ends themselves.\u003cbr\u003eIt also reduces unwanted deflection in the sway bar end. Excess deflection creates unwanted geometry changes, which physically changes your sway bar stiffness to a non-ideal rate.\u003c\/p\u003e\n\u003cp\u003eWith less unwanted deflection, our bars will 'wear out' slower - any spring will eventually become softer over time as it is cycled through its life, our bars will maintain their designed rate for longer with less unwanted deflection.\u003c\/p\u003e\n\u003cp\u003eOur bar rates are developed and optimized through advanced vehicle dynamic simulation and through extensive real-world testing. We engineered these bars to control the vehicles' roll stiffness properly while still allowing you to run softer springs. This optimizes your overall grip and balance of the vehicle while still allowing you to maintain exceptional ride quality.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMASSIVE 1.5\" (One and a half inch \/ 38mm) diameter\u003c\/li\u003e\n\u003cli\u003eA true 1.5 inch \/ 38mm bar, unlike smaller bars from competitors marketed as 1.5 inch\u003c\/li\u003e\n\u003cli\u003eImproved handling, more stable cornering\u003c\/li\u003e\n\u003cli\u003eReduced body roll\u003c\/li\u003e\n\u003cli\u003eStiffest Sway Bar on the market\u003c\/li\u003e\n\u003cli\u003eCompetition and street-proven\u003c\/li\u003e\n\u003cli\u003eFour adjustment positions from soft to firm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Front Sway bar will fit vehicles equipped with MagneRide Suspension but cannot be used at softest setting due to contact with factory ride height sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTEEDA TIP: \u003c\/strong\u003eIdeal for use in auto X type events, often held on rougher surfaces, where softer springs \/ stock springs are in use, allowing the suspension to soak up the bumps but the bar to counter excessive roll. For track day \/ race build use, our standard bar will probably be better suited as this bar may be TOO stiff for ideal weight transfer with stiffer track focussed suspension.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFitment:\u003cbr\u003eS550 Mustang 2015-2023: All\u003cbr\u003eS650 Mustang 2024+ All\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIAL ORDER PART\u003c\/strong\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":31150585151560,"sku":"555-1038","price":415.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/555-1038_Mustang_RACE_front_roll_bar_1c78a683-0d2d-4575-8544-2d5fdce4dfa4.jpg?v=1726048124"},{"product_id":"steeda-s550-gt-gt350-mustang-road-race-or-drag-front-k-member","title":"Steeda GT\/GT350 Mustang Road Race or Drag Front K-Member 2015-2024+","description":"\u003cp\u003eImprove weight distribution and handling with Steeda's Road Race K-Member. Track tested with proven results, the Steeda Road Race K-Member will help to cut down lap times and provide the driver with better feel of their Mustang.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWeight Savings\u003c\/strong\u003e. Weight is the enemy of performance, and weight distribution is critical on performance cars. That's why Steeda has designed the Road Race K-Member to reduce weight and help with weight distribution so that you can corner better and have more control over your S550 or S650 V8 Mustang. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAdds Rigidity\u003c\/strong\u003e. The Steeda Road-Race K-Member mounts at key points and has bracing to add strength to specific points. All factory mounting points have been utilized for improved strength and the tension and lateral link mounts have been boxed and gusseted.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFactory Mounting Positions\u003c\/strong\u003e. The factory mounting positions are retained to allow for ease of use and to retain compatibility with OE components. The Road-Race K-Member is compatible with OEM steering and suspension and factory sway bar mounts. Factory engine mounts are retained as well but upgrading to Steeda Engine Mounts is recommended. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eROAD RACE K-Member:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e20% lighter than the factory K-member.\u003c\/li\u003e\n\u003cli\u003eDesigned for road race applications.\u003c\/li\u003e\n\u003cli\u003eBolt-in design does not require any modifications.\u003c\/li\u003e\n\u003cli\u003eRetains all factory mounting locations.\u003c\/li\u003e\n\u003cli\u003eAdjustable front track width.\u003c\/li\u003e\n\u003cli\u003eAdjustable front Roll center.\u003c\/li\u003e\n\u003cli\u003eBuilt-in, adjustable G-Trac Brace (for long tube headers).\u003c\/li\u003e\n\u003cli\u003eBuilt-in tie down hooks for easy use when trailering.\u003c\/li\u003e\n\u003cli\u003eMagneRide sensor hook-ups to maintain MagneRide.\u003c\/li\u003e\n\u003cli\u003eAdditional bracing in key area's.\u003c\/li\u003e\n\u003cli\u003eUsed on our S550 #20 car and Red #18 HPDE car in testing.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlso tested on our S650 Q500 HPDE car\u003c\/li\u003e\n\u003cli\u003eCompetition proven on our #20 car.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDRAG K-Member\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for drag race applications\u003c\/li\u003e\n\u003cli\u003eWeighs only 34lbs, nearly 30lbs (13.6 KG!) lighter than the stock K-Member\u003c\/li\u003e\n\u003cli\u003eBolt-In design does not require any modifications\u003c\/li\u003e\n\u003cli\u003eUtilizes all factory mounting locations for strength and rigidity\u003c\/li\u003e\n\u003cli\u003eIncorporated tie down loops for easy use when trailering\u003c\/li\u003e\n\u003cli\u003eIncludes option to retain front swaybar\u003c\/li\u003e\n\u003cli\u003eDeveloped and used on our World Record Setting S550 Mustang\u003c\/li\u003e\n\u003cli\u003eExtra clearance for long tube headers and has tabs for Helion Turbo Kits\u003c\/li\u003e\n\u003cli\u003eBoxed and gusseted tension link and lateral link mounts for the ultimate in strength making it the strongest S550 K-member on the market!\u003c\/li\u003e\n\u003cli\u003eAdjustable roll center and wheel base for better aerodynamics\u003c\/li\u003e\n\u003cli\u003eProvision and tabs for Hellion turbo kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003cbr\u003eThis K-member is designed for \u003cstrong\u003eoff road competition use only\u003c\/strong\u003e and is not covered under any warranty stated or implied.\u003cbr\u003eThis item ships by truck freight; additional charges will apply if shipping to a residential address. It is \u003cstrong\u003eLARGE\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003eSteeda was started by racers and is full of individuals that are passionate about cars. Parts that are manufactured go through testing and are actually put through their paces to ensure that customers are receiving a high-quality product that will deliver results. You can see the results of the Road Racing K-Member in Steeda's Palm Beach Classic, Florida Cup video.\u003c\/p\u003e\n\u003cp\u003ePart:\u003cbr\u003e555-5060 - DRAG K member\u003cbr\u003e555-5061 Road Race K member\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFitment : S550 Mustang GT or GT350 2015+, also V8 S650 (GT \u0026amp; Darkhorse)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIAL ORDER RACE PART\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Steeda S550 Mustang K member install guide\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-5061-installation-instructions-v3-K_Member.pdf?v=1588874279\" target=\"_blank\"\u003e\u003cstrong\u003eINSTALL GUIDE: CLICK HERE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"DRAG K-Member","offer_id":31486753210440,"sku":"555-5060","price":2082.5,"currency_code":"GBP","in_stock":true},{"title":"ROAD RACE K-Member","offer_id":31486753243208,"sku":"555-5061","price":2165.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/Steeda_Drag_K_Member_S550_Mustang.jpg?v=1726048134"},{"product_id":"steeda-s550-mustang-lightweight-race-front-or-rear-bumper-bar-2015-2020","title":"Steeda Mustang Lightweight Race Front or Rear Bumper Bar (2015-2024+)","description":"\u003cp\u003eInstall Steeda's drag race only S550 and S650 front or rear bumper bar to add some support and save weight. Steeda makes the installation easy for you, as this part is a direct fit and gets rid of the bulky OEM front bumper reinforcement or crash bar in the 2015-2024+ Mustangs. Get your Mustang race ready with this upgrade.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight savings of up to 10.5 pounds **\u003c\/li\u003e\n\u003cli\u003eDirect fit bolt-in design\u003c\/li\u003e\n\u003cli\u003eNo modifications required to install\u003c\/li\u003e\n\u003cli\u003eMore space for front mount intercoolers\u003c\/li\u003e\n\u003cli\u003eBetter flow to radiators \/ intercoolers\u003c\/li\u003e\n\u003cli\u003eFront and Rear available\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTRACK ONLY - NOT FOR USE ON THE ROAD\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFitment: Ford Mustang S550 GT \u0026amp; Ecoboost 2015+ inc facelift \u0026amp; S650\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eSelect parts using drop down above. To order both, select each and add to cart one at a time.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRACE PART: SPECIAL ORDER ONLY\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eThe weight saving mentioned is based on our US spec development \u003c\/span\u003e\u003cspan\u003ecar\u003c\/span\u003e\u003cspan\u003e, for EU spec cars the weight saving may be less.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-5098-installation-instructions_front_bar.pdf?v=1586711890\" title=\"Steeda S550 Mustang Lightweight bumper bar install guide FRONT\" target=\"_blank\"\u003eINSTALL GUIDE FRONT (CLICK)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0045\/1723\/2755\/files\/555-5099-installation-instructions_rear_bar.pdf?v=1586711889\" title=\"Steeda S550 Mustang lightweight bumper bar install guide REAR\" target=\"_blank\"\u003eINSTALL GUIDE REAR (CLICK)\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Front","offer_id":31874585559112,"sku":"555-5098","price":165.83,"currency_code":"GBP","in_stock":false},{"title":"Rear","offer_id":31874585591880,"sku":"555-5099","price":165.83,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/555-5908_Lightweight_Front_crash_bar_RACE_d3dd78c2-4b56-46bd-ac27-b6e1f6b50c4d.jpg?v=1726048143"},{"product_id":"steeda-20-flow-form-bullitt-style-wheels","title":"Steeda 20\" Light Weight \"Mullholland\" Bullitt style wheels","description":"\u003cp\u003eThe \"Mullholland\" flow form wheels Steeda vehicles developed for the Steeda Steve McQueen limited Edition Mustang alongside McQueen Racing are available to order now.\u003c\/p\u003e\n\u003cp\u003eAvailable in gloss black only.\u003c\/p\u003e\n\u003cp\u003e20\" size with a 10\" front and 11\" rear setup to allow maximum Michelin rubber to the road, these retro look beauties could be what you need to take your Mustang to new heights!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese wheels are special order and are not held in stock. Please contact us for details about availability.\u003c\/li\u003e\n\u003cli\u003eWheels do not qualify for free shipping offers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":42154734649562,"sku":"MULHOLLAND-GB-KIT","price":3165.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/301-2066BK-35-v1-2__48090.webp?v=1778517802"},{"product_id":"velgen-vf9-flow-form-wheel-20","title":"Velgen VF9 Light Weight Series Wheel - 20\"","description":"\u003cp\u003eA gorgeous and lightweight take on the classic mesh look wheel with that Velgen touch, we present to you the Velgen VF9.\u003c\/p\u003e\n\u003cp\u003eManufactured using a specialised low pressure casting for the best weight and quality for the price. \u003cspan\u003eSuper Lightweight adds performance all round as well. Performance AND style? What's not to like?\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese beautiful wheels are available in 5 finishes:\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSatin or Gloss Black \/ Gloss Bronze \/ Gloss Gunmetal \/ Gloss Silver\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStaggered 20 x 10\" front and 11\" rear\u003c\/p\u003e\n\u003cp\u003eAll wheels are brought in to order via airfreight due to the variety of colours and sizes. \u003c\/p\u003e\n\u003cp\u003ePrice is for a set of 4 wheels.\u003cbr\u003eVelgen Wheels offers a 5 Year Manufacture Warranty \u0026amp; LIFE TIME STRUCTURAL WARRANTY. \u003c\/p\u003e\n\u003cp\u003eTo any of our customer's who have a warranty issue, please contact Velgen direct to their warranty department to handle any warranty claims. Velgen's warranty is only for the original purchaser.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTo make a set of Velgens even more accessible we offer payments with KLARNA allowing for interest free payments split over 3 payments\u003c\/p\u003e\n\u003cp\u003eLearn more here:\u003cbr\u003e\u003ca href=\"https:\/\/www.steeda.co.uk\/pages\/klarna-easy-payments\" title=\"Klarna payments with Steeda UK\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/files\/200x200.png?v=1759934201\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Velgen Wheels","offers":[{"title":"Gloss Silver - 20\" Wide","offer_id":38072314364071,"sku":null,"price":1999.17,"currency_code":"GBP","in_stock":true},{"title":"Gloss Black -20\" Wide","offer_id":38072314396839,"sku":"VF9-20-GLBLK","price":1999.17,"currency_code":"GBP","in_stock":true},{"title":"Gloss Bronze - 20\" Wide","offer_id":38072314429607,"sku":null,"price":1999.17,"currency_code":"GBP","in_stock":true},{"title":"Gloss Gunmetal - 20\" Wide","offer_id":38072314462375,"sku":null,"price":1999.17,"currency_code":"GBP","in_stock":true},{"title":"Satin Black - 20\" Wide","offer_id":38072314495143,"sku":null,"price":1999.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/products\/velgen-vf5-gloss-black-metallic_Mustang.jpg?v=1612460637"},{"product_id":"ford-performance-19-mach-one-handling-pack-birds-nest-wheels","title":"Ford Performance 19\" Mach One Handling Pack \"Birds Nest\" Wheels","description":"\u003cp\u003eHave a Mach One in the UK and want to upgrade it to \"Handling Pack\" status, which is not available in the UK? Have a standard GT or Ecoboost S550 Mustang and looking to change wheels but stay 19\" ?\u003c\/p\u003e\n\u003cp\u003eThen these are the wheels for you! Great looking and SUPER WIDE allowing the fitment of monster tyres for track use, these Ford Performance wheels come in a massive 19 x 10.5\" front and 19 x 11\" rear, allowing the use of up to the equivalent US Performance Pack tyres, the Michelin Pilot Sport 4S in 305\/30\/19 front and 315\/30\/19 rear!! \u003c\/p\u003e\n\u003cp\u003eNot only are these wheels stylish and huge, but they are also lightweight wheels for track use, offering a reduction of almost a kilo per wheel over the stock 19s.. (0.9kg approx) . And we all know the weight saved = performance gained, especially when it comes to wheels.\u003c\/p\u003e\n\u003cp\u003eAlso due to the huge width of these wheels, the Mach One Handling Pack comes with a moulded front arch lip extension to allow coverage of the extra-wide tyres. We highly recommend fitting these as well at the same time. They are direct fit for a Mach One model but will need slight modification to fit on a non Mach one. We sell these at a special price when bought with the wheels (SELECT FROM THE DROP DOWN)\u003c\/p\u003e\n\u003cp\u003eDon't forget we also stock the Mach One \"Handling Pack\" rear wing with a gurney flap to help complete the look!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis pack comes as a set from Ford Performance, but please note that unless you have a US import S550 the TPMS sensors that come with it will NOT work on UK \/ EU cars. You can purchase a set of official Ford TPMS Sensors on our site \u003ca title=\"TPMS Sensors for UK \/ EU mustang S550\" href=\"https:\/\/www.steeda.co.uk\/products\/ford-tpms-tire-pressure-monitor-sensor-valve-stem?_pos=1\u0026amp;_sid=001738214\u0026amp;_ss=r\"\u003eHERE\u003c\/a\u003e. - Don't forget you will need 4!\u003c\/li\u003e\n\u003cli\u003eHaving the tyre tread visible from beyond the arch is illegal in the UK hence we highly recommend getting the arch moulding extension kit.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWheels do not qualify for free shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart Number:\u003c\/p\u003e\n\u003cp\u003eM-1007K-MACH1H - Set of 4 Wheels\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eM-1007K-MACH1H-2\u003c\/span\u003e - Set of 4 Wheels + front arch mouldings\u003c\/p\u003e","brand":"Ford","offers":[{"title":"Wheels Pack","offer_id":42026505470170,"sku":"M-1007K-MACH1H","price":1624.17,"currency_code":"GBP","in_stock":true},{"title":"Wheels Pack + Front Fender Arch Moulding","offer_id":42026505502938,"sku":"M-1007K-MACH1H-2","price":2000.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/products\/Ford_Mach_One_Birds_nest_track_pack_19_wheel_single.jpg?v=1649777074"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0261\/9018\/4520\/collections\/Steeda_S650_GT_Autocross.jpg?v=1694610112","url":"https:\/\/www.steeda.co.uk\/collections\/s650\/exhaust-other.oembed","provider":"SteedaUK","version":"1.0","type":"link"}